Panasonic PN28080K-ID Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28080K-ID Operation Manual Manual pdf 21 page image

213.1.3. SNMP ConfigSelect "Basic Config" and "SNMP" and then "SNMPConfig" to open the screenshown in Figure 3-3. On this screen, you can configure the SNMP manager set-tings.Figure 3-3 snMP ConfigScreen DescriptionNo. Displays the entry number on the SNMP manager List.Status Displays the SNMP manager status.Enable The SNMP manager is enabled.Disable The SNMP manager is disabled.Privilege Displays the access privilege of the SNMP manager.Read-Write Both the read and write operations are allowed.Read-Only Only the read operation is allowed.IP Address This is the IP address for an SNMP manager.Community This is the community name used for SNMP access.