Panasonic PN28080K-TH Installation Manual

Also see for PN28080K-ID: Operation manual Operation manual Operation manual

Contents

Panasonic PN28080K-TH Installation Manual Manual pdf 13 page image

13Using "LED DISPLAY CHANGE BUTTON" on the front panel, you can switch thefollowing operations: indication of a connection status with a connected terminal(Status mode), indication of communication speed at 1000 Mbps (GIGA mode),indication of communication speed at 100 Mbps or 10 Mbps (Speed mode), indicationof transmission mode of full-duplex or half-duplex (DUPLEX mode), indication of aport having a history of loop occurrence (Loop History mode), or turning off LEDs ofall ports (ECO mode).LED DISPLAY CHANGE BUTTONMode at booting is called as Base mode. There are two types of Base modes, whichare Status mode (default setting at shipment) and ECO mode.To switch the Base mode, keep pressing "LED DISPLAY CHANGE BUTTON" for 3seconds or more.When switching is done successfully, 5 LEDs of STATUS/ECO LED, GIGA LED, 100MLED, and FULL LED are lighted once at the same time, they turned off, and then itenters a Base mode. After switching to PoE mode, GIGA mode, Speed mode, DUPLEXmode, or Loop History mode, and "LED DISPLAY CHANGE BUTTON" is not used for 1minute, it automatically returns to Base mode (Status mode or ECO mode). Basemode is held even if power supply was turned OFF. How to switch the display using the LED DISPLAY CHANGE BUTTON Two Base modes and other modes2.1 LED display change