Panasonic PT-47WX42 Operating Instructions Manual

Also see for PT47WX42F - 47" PROJECTION TV HD: Service manual Service manual

Contents

Panasonic PT-47WX42 Operating Instructions Manual Manual pdf 10 page image

8 lO PTIONAL EQUIPMENT CONNECTIONSOptional Equipment ConnectionsVCR ConnectionFollow this diagram when connecting your television to a VCR only.Note: The remote control must be programmed with supplied codes to operate the VCR.Viewing a television programProcedure1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to the television program you want to view.Viewing a videoProcedurer Option A1. Select ANT1 in the SET UP menu under Prog Chan.2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.3. Begin the video.r Option B1. Select ANT2 in the SET UP menu under Prog Chan.2. Tune the television to Channel 3 or 4, depending on your VCR.3. Begin the video.Recording a television programProcedurer Option A (Recording and viewing the same program)1. Select ANT2 in the SET UP menu under Prog Chan.2. Tune the television to Channel 3 or 4, depending on your VCR.3. Using the VCR, tune to the television program you want to record.4. Begin recording.r Option B (Recording one program while viewing another program)1. Select ANT1 in the SET UP menu under Prog Chan.2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.3. Using the VCR, tune to the television program you want to record.4. Begin recording.5. Press the TV/VIDEO button on the remote control to switch back to TV mode.6. Tune the television to the television program you want to view.VCRCABLES NOT SUPPLIEDCONNECTIONS ON BACK OF THE PTVS-VIDEOVIDEOAUDIOLRVIDEOYP BP RPROGOUTTOAMPLRINPUT1 INPUT2 INPUT3COMPONENTANT 1ANT 2SPLIT OUT1 2AUDIOVIDEO INPUTSLRAUDIO OUTVIDEO OUTANT INANT OUTIncomingCableUse either theS-Video or Videoconnection.