Panasonic PT-47WX42 Operating Instructions Manual

Also see for PT-47WX42: Operating instructions

Panasonic PT-47WX42 Operating Instructions Manual Manual pdf 21 page image

REMOTE CONTROL OPERATION (MODELS PT-47WX42, PT-53WX42 AND PT-E6WX42)Programming The RemoteThe Universal Remote Control can be programmed to operate many manufacturers' components, using the componentfunction buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with orwithout a code for the component.Default Modes For Remote Controlm]'___"rJt__ =B]'F__IF:R Im]_,dFJlrJ11TM "IV (Panasonic Only) Panasonic TV CodesVCR VCR (Preset) Panasonic VCR CodesDBS DBS (Preset) Panasonic DBS CodesCABLE CABLE (Preset) Panasonic DBS CodesDVD DVD, CD (Preset) Panasonic DVD CodesDetermine the manufacturer of the component and look in the table for the code.Programming With a CodeProcedureConfirm that the external component is plugged in and operating.Turn the component off.ACTION 0Press _, and together, for at least 5 seconds.Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.Enter the 3-digit component code using the Remote Control numeric keypad (0 - 9 buttons).Press the Remote Control O to test the component. If the procedure was successful, the component will turn on._ Unsuccessful Code 1_ith the Remote Control, repeat]Ithe procedure using another code. (Some brands have multiple/I codes). LI If an incorrect code is entered, or if the procedure takes longer thanl[ 30 seconds, the programming will fail. ]Programming Without A CodeThis procedure searches all codes and is called the "sequence method."Confirm that the external component is plugged in and on.Turn the component off,ACTIONPress O and _--_ together, for at least 5 seconds,vPress appropriate component button on the Remote Control.Press VOL_ to move forward to the next code. Press <_ VOL to move backward.Press the Remote Control _ to test the component. If the procedure was successful, the component will turn on.Note: Repeat the above steps until the component code is found. It may take many attempts before the correct codeis found.ACTIONAfter the code is found, press (_ to store the code.19 •