9I NSTALLATIONOptional Equipment Connections (Cont.)VCR and Cable Box ConnectionFollow this diagram when connecting your television to both a VCR and a cable box.Note: The remote control must be programmed with supplied codes to operate the VCR andcable box. See Programming the Remote Control in the Remote Control QuickReference Guide.Viewing a premium (scrambled) cable channelProcedure1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3.3. Using the cable box, tune to the premium cable channel you want to view.Note: To use special features such as Favorite Channels and Channel Captions (see SpecialFeatures section for more information), ANT1 must be selected in the SET UP menuunder Prog Chan.Recording a premium (scrambled) cable channelProcedure1. Select ANT2 in the SET UP menu under Prog Chan.2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,VIDEO 2, etc.) connected to your VCR.3. Turn the VCR ON.4. Tune the VCR to Channel 3 or 4, depending on your VCR.5. Using your cable box, tune to the premium cable channel you want to record.6. Begin recording.Note: To view a different channel while recording:• Select ANT1 in the SET UP menu under Prog Chan.• Press the TV/VIDEO button on the remote control to select TV mode.• Tune the television to a television program (except another premium cable channel).S-VIDEOVIDEOAUDIOLRVIDEOYP BP RPROGOUTTOAMPLRINPUT1 INPUT2 INPUT3COMPONENTANT 1ANT 2SPLIT OUTCENTER12 50 WATTS (DIN) MAX.1 2CHANNELINPUTAUDIOVIDEO INPUTSCONNECTIONS ON BACK OF THE PTVCABLES NOT SUPPLIEDIncomingCableCABLE BOXANT INANT OUTVCRLRAUDIO OUTVIDEO OUTANT OUTANT IN