Panasonic PT-47WX52C Operating Instructions Manual

Contents

4 lI NSTALLATIONInstallationTelevision LocationThis unit can be used as an entertainment center. Consult your dealer for available options.r Avoid excessive sunlight or bright lights, including reflections.r Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.r Fluorescent lighting may reduce remote control transmitting range.r Keep away from magnetic equipment, including motors, fans and external speakers.Optional Cable ConnectionsShielded audio and video cables should be used between components. For best results:r Use 75-ohm coaxial shielded cables.r Use appropriate input and output connectors, that match your component connectors.r Avoid long cables to minimize interference.AC Power Supply CordCAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLYINSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTEDTO PREVENT BLADE EXPOSURE.PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY ATPLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.Cable / Antenna ConnectionFor proper reception, either a cable or antenna connection is required.Cable ConnectionConnect the cable supplied by your local cable company to ANT1 connection on back of television. Select cablemode and ANT1 in SET UP menu under Prog Chan (Program Channels).Note: A cable converter box may be required for proper reception. Check with your local cable company forcompatibility requirements.Antenna Connections• For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna isrecommended.• Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in theSET UP menu under Prog Chan.Polarized plug75 Ohm VHF/UHFon back of PTVIncoming Cable fromCable CompanyIncoming Cable fromHome AntennaCable PresetCable Mode is preset at the factory.Antenna users must change to TV Mode andANT 1 in the Set Up menu.