Panasonic PT-53WX54 Operating Instructions Manual
Also see for PT-53WX54: Operating instructions
                                    | |
Contents
|
OPTIONAL EQUIPMENT CONNECTIONSOptional Equipment Connections (cont.)VCR and Cable Box Connection (Cont.)Recording a premium (scrambled) cable channelProcedureSelect ANT2 in the SET UP menu.Press the TVNIDEO button on the remote control toselect the video input (VIDEO 1, VIDEO 2, etc.)connected to your VCR.Turn the VCR ON.Tune the VCR to Channel 3 or 4, depending on theswitch setting on the back of VCR.Using your cable box, tune to the premium cable channelyou want to record.Begin recording.[3 To view a different channel while recording:Select ANT1 in the SET UP menu.Press the TVNIDEO button on the remote centre] to TVmode.Tune the television to a program (except anotherpremium cable channel).Amplifier Connection (TO AUDIO AMP)To listen through a separate stereo system, connect anexternal audio amplifier TO AUDIO AMP outputs on back oftelevision.Note: TO AUDIO AMP terminals cannot be connected directlyto external speakers.Audio AdjustmentsSelect SPEAKERS ON located in the enscreen AUDIOmenu.Set amplifier volume to minimum.Adjust television volume to desired level.Adjust amplifier volume to match the television.Select SPEAKERS OFF & VARIABLE AUDIO OUT fromAUDIO menu.Volume, mute, bass, treble and balance are nowcontrolled through the television.Note: Select SPEAKERS OFF & FIXED AUDIO OUT to controlaudio functions through the external amplifie_Program Out Connection (PROG OUT)To use the television audio and video with optional equipment,connect the PROG OUT and TO AUDIO AMP connections on theback of the television.; MONITOR VCR0Note: ff the ma#) picture signal is DVI er Component video#)put, no Program Out function is available.ProcedureConnect optional equipment to PROG OUT and TOAUDIO AMP terminals. PROG OUT display is same asonscreen display. See optional equipment manual forfurther instructions for recording and monitoring.Digital TV - Set-Top Box (DTV-STB) or DVDCon nectionThis television is capable of displaying 1080i and 480p DTVsignals when connected to a DTV tuner set-top-box (STB). inorder to view DTV programming, the STB must be connectedto the component video inputs (Y,PB,PR) of the television. ADTV signal must be available in your area. Select the output ofthe STB to either 1080i or 480p.This television also utilizes a progressive scan doubler, whichde-interlaces the NTSC signal and progressively scans theimage. This allows you to sit close to the TV and not see thethin black horizontal lines (venetian blind effect) associatedwith interlaced TV pictures.Use this diagram to connect the DTV-STB or DVD player tothe back of your projection television.Note: There are two sets of three video lacks, Y, PB, and PR.Separate component color #)puts provide luminance andcolor separation. Use the L (left) and R (right) audio#)puts.Front Control PanelThe front control panel can be used to access menus andswitch video mode when the remote control is net available.The ON/OFF indicator LED (red) will be lit when set is on.OPt_O FRA second VCR, Camcorder, a video disc player, video gameequipment or DSS equipment can also be connected to thevideo inputs. See the optional equipment manual for details.ProcedureConnect equipment to front Audio/Video input jacks.Press TV/VIDEO button to select VIDEO 4 input mode.Operate optional equipment as instructed in equipmentmanual.8o |
Related manuals for Panasonic PT-53WX54
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine