INSTALLA TIONOptional Equipment ConnectionsVCR ConnectionFollow this diagram when connecting your television to a VCR only,VCR F-_-_,o_oouT_'to.o iJ_ L _ SPEAKEFI INPUT PROG. INPUT I_lI I"_J _lIv,o uT;'I"-J '' -""*°uTr--_ IV,OEO@@_ANTINPUT I II 1_ _-'.1 r_@@_'"-C_@@ ¢?..L --_.I _coming C_ble-_] J :ABL--ES--NO-TS_PPUEDTERMINALS ON BACK OF TVCOMPONENTVIDEO INPUTr_3y [_1 v/@@" I@@"" " L,,o,o@LAUDqO@ R p.mNote: The remote control must be programmed with supplied codes to operate the VCR. SeeProgramming the Remote Control in the Remote Control Quick Reference Guide.Viewing a television programProcedure1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to the television program you want to view.Viewing a videoProcedureO Option A1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,VIDEO 2, etc.) connected to your VCR.3. Begin the video.Option B1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR.3. Begin the video.Note: The S-VIDEO connection is optional and overrides other VIDEO connection.Recording a television programProcedureC3 Option A (Recording and viewing the same program)1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR.3. Using the VCR, tune to the television program you want to record.4. Begin recording.[] Option B (Recording one program while viewing another program)1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Press the TVNIDEO button on the remote control to select the video input (VIDEO 1,VIDEO 2, etc.) connected to your VCR.3. Using the VCR, tune to the television program you want to record.4. Begin recording.5. Press the TV/VIDEO button on the remote control to switch back to regular television.6. Tune the television to the television program you want to view.