Panasonic PT-AE3000E Operating Instructions Manual

Also see for PT-AE3000E: Brochure & specs Service manual Service manual

Contents

Panasonic PT-AE3000E Operating Instructions Manual Manual pdf 37 page image

ENGLISH - 37 SettingsPOSITION menuYou can move the projected image horizontally for fineadjustment.You can move the projected image vertically for fineadjustment.If you have interference patterns of the projected image,which is sometimes referred to as moire or noise, youcan minimize it by pressing I H to adjust the clockfrequency. (Available with signals from COMPUTER INonly)If you require further adjustment for the same reason asthe DOT CLOCK adjustment, you can fine adjust thetiming of the clock. Press I H to adjust. (Available withsignals from COMPUTER IN/COMPONENT IN only)You can switch the aspect ratio manually when needed.J Aspect ratio depend on signalsPress I H to cycle through the aspect ratiooptions. The cycle pattern depends on theconnected signals.H-POSITIONV-POSITIONDOT CLOCKNOTE:• If the projecting signal’s dot clock frequency is higherthan 150 MHz, the adjustment may not make adifference.• DOT CLOCK needs to be adjusted before adjusting theCLOCK PHASE.Remote control Control panelSee “Navigating through the MENU” on page 29.See “Main menu and sub-menu” on page 30.MoverightMove leftMove upMovedownCLOCK PHASENOTE:• If the projecting signal’s dot clock frequency is higherthan 150 MHz, the adjustment may not make adifference.• Available signals from COMPONENT IN:1 125 (1 080)/60i, 1 125 (1 080)/50i, 1 125 (1 080)/60p,1 125 (1 080)/50p, 1 125 (1 080)/24p, 750 (720)/60pASPECTVIDEO/S-VIDEO4:3 \ 16:9 \ 14:9 \ ZOOM1 \ZOOM2 \ JUSTAUTO \ 4:3 \ 16:9 \ JUST \ ZOOMNTSC signalCOMPUTER(RGB)4:3 \ 16:94:3 \ 16:9VGA or SVGA signalsNot switchable withWIDE480/600/720/768/768-2/800/900signalsHDMI4:3 \ 16:916:9 \ H - FIT \ V - FIT \ ZOOM1 125 (1 080)/50i, 1 125 (1 080)/60i,1 125 (1 080)/50p, 1 125 (1 080)/60p,1 125 (1 080)/24p, 750 (720)/50p and750 (720)/60p signals4:3 \ 16:9 \ JUST \ ZOOM525p (480p) and 625p (576p) signalsCOMPONENT(YPBPR)4:3 \ 16:9 \ 14:9 \ JUST \ ZOOM1\ ZOOM2625i (576i), 625p (576p)AUTO \ 4:3 \ 16:9 \ JUST \ ZOOM525i (480i), 525p (480p)16:9 \ H - FIT \ V - FIT1 125 (1 080)/50i, 1 125 (1 080)/60i,1 125 (1 080)/50p, 1 125 (1 080)/60p,1 125 (1 080)/24p, 750 (720)/50p,750 (720)/60p signals