Panasonic PT-AX200U Operating Instructions Manual

Also see for PT-AX200: Spec file Specification sheet Specification sheet Warranty Dimensions

Contents

Panasonic PT-AX200U Operating Instructions Manual Manual pdf 36 page image

SettingsPOSITION menu36 - ENGLISHWSS (Wide Screen Signalling) detects if a PAL/625p (576p)/625i (576i) signal is input and that signalhas an identification signal, and switch the aspect ratioto required setting automatically. You can switch thesystem off manually.If the 4 edges of an image is partly dropped, you can usethis function to adjust and project it properly.Setting range: 0 to +10OVER SCAN is not available with COMPUTERsignals.If the projector is aligned non-perpendicularly to thescreen, or if the projection screen has an angled surface,you can vertically correct keystone.Setting range: -32 to 32You can adjust V - POSITION, H - POSITION, DOTCLOCK and CLOCK PHASE automatically whenconnecting via COMPUTER IN. Press ENTER to adjustthese at the same time.WSSOVER SCANEnlargeShrinkKEYSTONEImage OperationNOTE:• You can correct the distortion ± 30 degrees from thevertical plane. For a better quality image, installing theprojector with a minimum of distortion is recommended.• Some distortion may be retained for the lens shiftadjustment.• The distortion of the main menu screen is notcorrectable.• The result of the keystone correction will affect theaspect ratio and the size of the image.AUTO SETUP