70Automatic adjustment(Only for RGB input)Use this setting when adjusting a specific or oblong(16:9, etc.) signal.Press the MENU button.The MAIN MENU screen will be displayed.Select “OPTION” with thebuttons.Press the ENTER button.The OPTION screen will be displayed.Using the buttons, select “AUTOSETUP”.Press the ENTER button.The AUTO SETUP screen will be displayed.Using the buttons, switch to thedesired mode.“DEFAULT”: to receive signals of which imageaspect is 4:3 or 5:4“WIDE”: to receive signals of which imageaspect is 16:9 (oblong)“USER”: to receive signals of specific horizontalresolution (number of horizontallydisplayed dots)If “USER” is selected, enter thehorizontal resolution of signal sourceinto “DISPLAY DOTS” usingbuttons.Press the ENTER button.Execute automatic adjustment.A message “PROGRESS...” appears duringautomatic adjustment.When the adjustment is complete, the systemreturns to the input screen.MODEDEFAULTWIDEApplicable resolution640 x 400, 640 x 480, 800 x 600, 832 x624, 960 x 720, 1 024 x 768, 1 152 x 864,1 152 x 870, 1 280 x 960, 1 280 x 1 024,1 600 x 1 200, 1 400 x 1 050720 x 400, 848 x 480, 1 280 x 720,1 120 x 750, 1 376 x 768, 1 600 x 1 024Video settingThis feature allows the user to select the signalingsystem according to the connected device.Select “VIDEO SETTING” from the“OPTION” screen and press the ENTERbutton.The “VIDEO SETTING” screen will be displayed.Use the buttons to select"VIDEO" or "S-VIDEO".Use the buttons to select “AUTO1” or “AUTO 2”.“AUTO1”: The system is automatically selected fromamong NTSC, PAL, SECAM, NTSC4.43 andPAL60.“AUTO2”: The system is automatically selected fromamong NTSC, PAL-M and PAL-N.Option settingsDVI EDID(Only when the ET-MD77DV input module isinstalled)Select the EDID mode setting that corresponds tothe device to be connected.Select “DVI EDID” from the “OPTION”screen and press the ENTER button.Use the buttons to select“EDID1” or “EDID2”.MODEEDID1EDID2Input signal formats supported480p, 576p, 720/60p, 720/59.94p, 720/50p,1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF,1 080/23.98sF, 1 080/30p, 1 080/29.97p,1 080/25p, 1 080/24p, 1 080/23.98pDisplayable resolution:VGA-UXGA (non-interlace)Dot clock frequency:25 MHz - 162 MHzNote • Interlace signals are not supported evenwhen the EDID2 mode is selected.
