Panasonic PT-DZ870K Specification

Contents

498 (19/32)513 (20-3/16)43(1-11/16)556 (21-7/8)21(13/16)95(3-3/4)179 (7-1/16)200 (7-7/8)28(1-3/32)442 (13/32) 432 (17)Dimensionsunit : mm (inch)NOTE: This illustration is not drawn to scale.The illustration shows the PT-DZ870K/DZ870W.Terminals18 9 10 11 12 13 142 3 4 5 6 7 1 Remote 1 input2 Remote 1 output3 Remote 2 input4 Serial input5 Serial output6 3D sync 1 input/output7 3D sync 2 output8 SDI input9 Video input10 RGB 1 input11 RGB 2 Input12 DVI-D input13 HDMI input14 LAN/DIGITAL LINK connectorWeights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.*1 When the STANDBY MODE is set to ECO , network functions such as power on over the LAN network will not operate, and the serial output terminalcannot be used. Also, only certain commands can be received for external control using the serial terminal.*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.*6 With*7 Average value. May differ depending on models.legs at shortest position.*8 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 mto 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode)when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately20% to protect the projector.*9 Operation range differs depending on environments.*3 Up to a total of ±55° during simultaneous horizontal and vertical correction.*4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)*5 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).DIGITAL LINKSDI IN3D SYNCIN/OUT OUTVIDEO INPT-DZ870K/DZ870W/DZ870LK/DZ870LWDLP TM ProjectorAs of September 2013 5 / 2 5SFD13M004-2