-102-TroubleshootingError Error code Error infomation(See power failure detection system) Error code Error infomation(See power failure detection system)Normal 0 -Power failure1000 KS&DL, 1014 MAIN, S3.3V1001 GAMMA, 3.3V 1015 MAIN, S5V1002 GAMMA, 2.5V 1016 MAIN, S5VL1003 GAMMA, 1.8V 1017 AUDIO&ID, 12V1004 SH&PANEL, 15.5V 1018 SWFPGA, 1.2V1005 HDMI, 5V 1019 FN901,1006 HDMI, 3.3V 1020 FN902,1007 HDMI, 1.2V 1021 FN903,1008 ADC, 3.3V 1022 FN904,1009 ADC, 1.8VD 1023 FN905,1010 ADC, 1.8VA 1024 FN906,907,908,1011 AV, S-6V 1025 FN909,910,911,1012 LENS, 9V 1026 FILTER, DET1013 LENS, 15VTemperature Error2000 Sensor A detects abnormal temperature. (IC1692-ROOM)2001 Sensor A fails measurement. (IC1692)2100 Sensor B detects abnormal temperature. (IC1816-LAMP)2101 Sensor B fails measurement. (IC1816)2102 Sensors B-A temperature error.2200 Sensor C detects abnormal temperature. (IC1814-PANEL)2201 Sensor C fails measurement. (IC1814)2202 Sensors C-A temperature error.Lamp Error3000 Lamp1 fails on3001 Lamp1 goes out3002 Communication error on lamp1System Error 4000 SWFPGA, ERRORShutter Error 5000 SHUTTER,ERRORFilter Error 6000 Air filter unitIRIS Error 7000 IRIS, ERRORError LogThis projector provides the error history log function. Tocheck the logs, you need to enter the service mode and se-lect Group No. "220" and item No. "0" to "49". The errorcode is displayed on the data column. The description of theerror code is listed on the table below.* How to enter the service mode and select the group, itemand data value, see "Service Adjustment Menu Opera-tion".GroupNo.ItemNo.Data(Error Code)220 0123::49[ <- Latest Error[[[::[How to reset the Error Log1. Enter the Service Mode, and select Group No. "220" and Item No. "50".2 The history log will be reset when the data value is set to "10". The value automatically returns to "0".* How to enter the service mode and select the group, item and data value, see "Service Adjustment Menu Operation".