Panasonic PT-F100NT Spec File

Also see for PT-F100NT: Specifications Dimensions Network Operation Manual Setup and operation manual Network manual

Contents

lcd projector

Panasonic PT-F100NT Spec File Manual pdf 3 page image

S P E C F I L EPT-F100NTLCD ProjectorAs of May 2007 < 3 >Power cord lengthCabinet materialDimensions (W x H x D)WeightOperating environment TemperatureHumidityRemote control unit Power supplyOperation range*Dimensions (W x H x D)WeightWireless LAN StandardModulationIEEE 802.11bIEEE 802.11gTransmission systemIEEE 802.11bIEEE 802.11gTransmission speedIEEE 802.11bIEEE 802.11gOperating range* 1Frequency rangeChannelsSupplied accessoriesOptional accessories2 m/6´7˝Moulded plastic (PC+ABS)432 x 124.5 x 319 mm (17˝ x 4-29/32˝ x 12-9/16˝)6.2 kg (13.7 lbs.)0°– 40°C (32°–104°F)20%– 80% (no condensation)3 V DC (AA battery x 2)Approx. 15 m (49´3˝) when operated from directly in front of thesignal receptor48 x 163 x 24.5 mm (1-7/8˝ x 6-13/32˝ x 31/32˝)117 g (4.1 oz) (including batteries)IEEE 802.11b/gDirect sequence spread spectrum (DSSS) systemOrthogonal frequency division multiplex (OFDM) systemCCK (11/5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps)64-QAM (54/48 Mbps), 16-QAM (36/24 Mbps), QPSK (18/12 Mbps),BPSK (9/6 Mbps)11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps,6 MbpsApprox. 30 mPT-F100NTE/F100NTEA: 2,412 MHz–2,472 MHzPT-F100NTU: 2,412 MHz–2,462 MHzPT-F100NTE/F100NTEA: 1–13 chPT-F100NTU: 1–11 chPower cordWireless remote controlBatteries for remote controlWireless Manager ME 4.0 (CD-ROM)Safety wire ropeReplacement lamp unit: ET-LAF100Replacement filter unit: ET-RFF100Ceiling mount bracket for high ceilings: ET-PKF100HCeiling mount bracket for low ceilings: ET-PKF100SWeights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject toexport control regulations. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. Intel and Pentium are registered trademarks ofIntel Corporation. Microsoft, Windows Vista and Windows are either registered trademarks or trademarks of Microsoft Corporation in theUnited States and/or other countries. All other trademarks are the property of their respective trademark owners.*: Operation range differs depending on environments.To use network functions, a PC is required that meets the conditions given below:OS: Microsoft ® Windows ® 2000 Professional, Windows ® XP Professional, Windows ® XP HomeEdition, Windows Vista™NOTE: Some functions are not available with Windows Vista™.Web browser: Internet Explorer 6.0 or later, or Netscape Communicator 7.0 or laterCPU: Windows ® : Intel ® Pentium ® III or higher, or other compatible processor (1 GHz or higher isrecommended.)Memory: 256 MB or moreFree hard disk space: 60 MB or moreCD-ROM drive: CD-ROM drive or DVD driveWireless LAN: IEEE 802.11b/g compatible (built-in wireless LAN system or external IEEE 802.11b/g LANcard must be installed and running normally.)NOTE: Some IEEE 802.11g/b wireless LAN may not allow connection to the projector.Wired LAN connector: RJ-45NOTE: Use Category 5e (or higher) cables for use with 1000BASE-T.