Panasonic PT-F200E Operating Instructions Manual

Also see for PT-F200E: Operating instructions

Contents

Panasonic PT-F200E Operating Instructions Manual Manual pdf 41 page image

ENGLISH - 41 SettingsSECURITY menuJ Entering the SECURITY menuEvery time when you apply to the SECURITYmenu, you will be asked to perform the passwordoperation.When you apply to the SECURITY menu before youchange the password to your original, perform to inputthe following factory default password operation.Press F H G I F H G I and ENTER.Q After you change the passwordWhen you apply to the SECURITY menu after youchange the password to your original in thePASSWORD CHANGE menu, input the originalpassword operation.You can activate the security system and the passwordoperation will be asked to perform when the projectingmode started. Unless you perform the correct passwordoperation, all of the button controls will be disabledexcept the POWER button.OFF DeactiveON ActiveYou can change the password operation to your original.1. Press a series of button operation up to 8 as apassword by using F G I and H buttons.2. Press ENTER.3. Press the exact same series of button operationyou entered in the NEW password box forconfirmation.If a series of button operation is incorrect, you will beasked to perform again.4. Press ENTER.You can set your original text, such as company name orURL information, to display regularly at the bottom of theprojected image while projecting.OFF DeactiveON ActiveYou can enter your original text up to 22 characters forTEXT DISPLAY.1. Use F G I H to specify the location of therequired character.2. Press ENTER.The selected character will be displayed in the TEXTCHANGE box.3. Repeat until finish your original text.Select DELETE to delete the last entered characterand press ENTER.4. Select OK and press ENTER to set the enteredtext.Select CANCEL or press MENU/RETURN buttons toreturn to the previous menu.NOTE:• The factory default password is valid until you changethe password in PASSWORD CHANGE menu.• The entered password operations will appear asasterisks in the box.INPUT PASSWORDNOTE:• When you activated the security system, make sure tochange the password to your original for safety.• The security system is deactivated by default and wheninitialised.Remote control Control panelSee “Navigating through the MENU” on page 31.See “Main menu and Sub-menu” on page 32.PICTUREPOSITIONINPUT PASSWORDPASSWORD CHANGETEXT DISPLAYTEXT CHANGEPASSWORDLANGUAGEOPTIONSECURITYNETWORKOFFOFFSELECTENTERRETURNPASSWORD CHANGENOTE:• The entered password operations will appear asasterisks in the box.• Change your password regularly.• Do not use too simple password to guess.TEXT DISPLAYTEXT CHANGEOK CANCELDELETETEXT CHANGE