Panasonic PT-FW100NTU Service Manual

Also see for PT-FW100NTE: Operating instructions User manual Quick guide Quick guide Network guide

Panasonic PT-FW100NTU Service Manual Manual pdf 10 page image

3.3. Canceling the self-check modePress "MENU" button on the main unit or remote control unit.4 Test PatternThis projector displays seven kinds of test patterns [Horizontal lines, Vertical lines, Dots, Crosshatch, White cross, Black cross andWhite (No pattern)] in the four colors (White, Red, Green and Blue).Note:· Because the above patterns can be displayed by each color without test equipment such as PC or SG, use it for simplifiedadjustments by your eyes and so on.4.1. Procedure to display test patternsSelect "TEST PATTERN" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.Note:· On the test pattern screen, pressing the up-arrow " " or down-arrow " " button allows the test pattern selection andthe left-arrow " " or right-arrow " " button the color selection (White / Red / Green / Blue).4.2. Canceling the test pattern displayPress "MENU" button on the main unit or remote control unit.5 Flicker Adjustment ModeIf replacing the optical parts (LCD Panel / LCD block) of this projector and/or A-P.C.Board (assembly), enter the flicker adjustmentmode and minimize the flicker.5.1. Procedure to enter the adjustment modeSelect "FLICKER ADJUST" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.Note:"DESK setting (blue)" is displayed when entering the adjustment mode.5.2. Adjustment Display and Contents· Setting value is increased and decreased with the right-arrow " " and left-arrow " " buttons." ": Decrease, " ": Increase−−−− Adjust the setting value to minimize the flicker on the screen.−−−− Execute the adjustment by 6 patterns below.· The pattern (adjustment display) is switched with the up-arrow " " and down-arrow " " buttons." ": Forward direction, " ": Reverse direction−−−− There are 6 patterns of "DESK setting (blue)", "DESK setting (red)", "DESK setting (green)", "CEILING setting (blue)","CEILING setting (red)" and "CEILING setting (green)".−−−− The setting value is saved into this projector when the pattern is switched.5.3. Canceling the flicker adjustment modePress "MENU" button on the main unit or remote control unit.Note:When "MENU" button is pressed, the setting value at that time is saved into this projector and the adjustment mode is canceled.10PT-FW100NTU / PT-FW100NTE / PT-FW100NTEA