Panasonic PT-FW300E Operating Instructions Manual

Also see for PT-FW300E: Operating instructions Service manual Service manual

Contents

Panasonic PT-FW300E Operating Instructions Manual Manual pdf 34 page image

SettingsMenu NavigationENGLISH - 34J Displaying the Main menuPress the MENU button to display the main menuand the operating guidance.J Adjusting with the bar scaleitemsThe triangle mark under the bar indicates factorydefault setting and the square indicates the currentsetting.J Returning to the previous menuPress the MENU or RETURN button to return tothe previous menu. Press repeatedly to escapefrom the menu mode and return to theprojection.J Operating procedure1. Press F G to scroll to the required main menuitem and press the ENTER button to select.The selected item is highlighted in orange and thesub-menu is displayed on the right.See “Main menu and Sub-menu” on page 32.2. Press F G to scroll to the required sub-menu itemand press I H or the ENTER button to adjust.The selected item is called up and the other menuitems disappear from the screen. Called up item willbe disappear after 5 seconds and return to the menumode.If there is a lower level, the next level will bedisplayed.3. Press I H to adjust or set the selected item.For items using a bar scale, the current settings aredisplayed on the left of the bar scale.You can cycle through the options of an item bypressing I H.4. Press the MENU or RETURN button to return tothe previous menu.Navigating through the menuPICTUREPOSITIONPICTURE MODECONTRASTBRIGHTNESSCOLORTINTSHARPNESSCOLOR TEMPERATUREDAYLIGHT VIEWDIGITAL CINEMA REALITYNOISE REDUCTIONTV-SYSTEMLANGUAGEPROJECTOR SETUPDISPLAY OPTIONSECURITYNETWORKSTANDARDDEFAULTAUTOONOFFAUTOSELECTENTERRETURNMain menu Sub-menuCurrentsettingsOperating guidanceContains the required buttons to adjust the settings.KEYSTONEKEYSTONECurrent settingDefaultPICTUREPOSITIONKEYSTONESHIFTLANGUAGEPROJECTOR SETUPDISPLAY OPTIONSECURITYNETWORKOVER SCANASPECT 16:9SELECTENTERRETURNPICTUREPOSITIONKEYSTONESHIFTLANGUAGEPROJECTOR SETUPDISPLAY OPTIONSECURITYNETWORKOVER SCANASPECT 16:9SELECTENTERRETURNKEYSTONEKEYSTONENOTE:• See “Resetting to the factory default settings” on page 29 to reset each menu item.• See “INITIALIZE ALL” on page 45 to reset all the settings.