Panasonic PT-FW430U Operating Instructions Manual

Also see for PT-FW430E: Operating instructions Specifications

Contents

Panasonic PT-FW430U Operating Instructions Manual Manual pdf 40 page image

40PJLink protocolThe network function of the projector supports PJLink class 1, and the PJLink protocol can be used to performprojector setting and projector status query operations from a computer.Control commandsThe following table lists the PJLink protocol commands that can be used to control the projector.Command Control details NotesPOWR Power supply controlParameters0 = Standby1 = Power ONPOWR ? Power supply status queryParameters0 = Standby 1 = Power ON2 = Cool-down in progress 3 = Warm-up in progressINPT Input selection Parameters11 = RGB1 12= DVI-I(ANALOG) _121 = VIDEO 22 = S-VIDEO31 = HDMI 32 = DVI-I(DIGITAL)_251 = NETWORK1 Enabled when “display options” → “DVI-I IN” → “digital/ analog”_setting is “analog”.2 Enabled when “display options” → “DVI-I IN” → “digital/ analog”_setting is “digital”.INPT ? Input selection queryAVMT AV MUTE control Parameters30 = AV MUTE mode off31 = AV MUTE mode onAVMT ? AV MUTE status queryERST ? Error status queryParameters1st byte : Indicates fan errors, range 0 – 22nd byte : Indicates lamp errors, range 0 – 23rd byte : Indicates temperature errors, range 0 – 24th byte : Fixed at 05th byte : Indicates filter errors, range 0 – 26th byte : Indicates other errors, range 0 – 2Definitions for each value from 0 to 2 are as follows.0 = No error known 1 = Warning 2 = ErrorLAMP ? Lamp status queryParameters1st digits (1 – 5 digits) : Lamp cumulative operating time2nd digit : 0 = Lamp off, 1 = Lamp onINST ? Input selection list queryThe following are returned as parameters.When “display options” → “DVI-I IN” → “digital/ analog” setting is“analog”.“11 12 21 22 31 32 51”When “display options” → “DVI-I IN” → “digital/ analog” setting is“digital”.“11 12 21 22 31 32 51”NAME ? Projector name query The name set for [NAME CHANGE] in [NETWORK] is returned.INF1 ? Manufacturer name query “Panasonic” is returned.INF2 ? Model name query Answer the model name with either “FW430” or “FX400”INF0 ? Other information query Information such as version number is returned.CLSS ? Class information query “1” is returned.