S P E C F I L EPT-FW430LCD ProjectorAs of March 2011SFL11M005-14 / 1 4Weights and dimensions shown are approximate. Specifications subject to change without notice.*1 When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate. Also, only certain com-mands can be received for external control using the serial terminal.*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.*3 The DVI-I IN terminal also accepts analog signals.*4 With legs at shortest position.*5 Operation range differs depending on environments.*6 The operating temperature range is 0°C–35°C (32°F–95°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)).*7 The operation system must be pre-installed at the factory or clean installed.Wireless Manager ME 5.5 system requirementsOSWeb browserCPUMemoryFree hard disk spaceCD-ROM driveWireless LANWired LAN connectorOptional accessoriesReplacement lamp unitReplacement filter unitCeiling mount bracketWireless moduleTo use network functions, a PC is required that meets the conditionsgiven below.Microsoft ®Windows ® XP: Professional 32-bit, Home Edition 32-bit, Tablet PCEdition 2005 32-bitWindows Vista ® : Ultimate 32-bit/64-bit, Business 32-bit/64-bit, HomePremium 32-bit/64-bit, Home Basic 32-bit/64-bitWindows ® 7: Ultimate 32-bit/64-bit, Professional 32-bit/64-bit,Home Premium 32-bit/64-bitApple Mac OS X* 7 : v10.4, v10.5, v10.6Windows ® : Internet Explorer 6.0/7.0/8.0Mac OS: Safari 2.0/3.0/4.0Windows ® : 1 GHz or higher Intel ® Pentium ® III or higher, orother compatible processorMac OS X: 1 GHz or higher PowerPC G4, or 1.8 GHz or higherIntel ® Core ™ processor256 MB or more (512 MB or higher is recommended for Mac OS X)60 MB or moreCD-ROM drive or DVD drive (required for installation)The optional ET-WM200 is required.IEEE 802.11b/g/n compatible (built-in wireless LAN system or externalIEEE 802.11b/g/n LAN card must be installed and running normally.)NOTE: Wireless connection may not be possible with some IEEE 802.11b/g/n wirelessLAN systems. Macintosh computers must have a built-in wireless LAN adapter.For IEEE 802.11n connection, use a wireless LAN adapter, projector and accesspoint that are IEEE 802.11n compatible, and connect with Infrastructure mode.RJ-45ET-LAF100AET-EMF100ET-PKF110H (for high ceilings)ET-PKF110S (for low ceilings)ET-WM200U (for North America)ET-WM200E (for Europe and Asia)