- 97 -Starting the direct playbackSetting up the conditions and starting the direct playbackFirst, set [SETUP] menu → [DIRECT PLAY SETTING] of the projector to [Content Manager].1 Set [DIRECT PLAY SETTING] to [Content Manager].f For details of [DIRECT PLAY SETTING], refer to “[DIRECT PLAY SETTING]” (Operating Instructions -Functional Manual).2 Click the [Direct play] menu on the top menu screen.f The [Remote control ID assignment] screen is displayed.f When it is operated on smartphone, the [Direct play] screen is displayed. Proceed to step 4.3 Click the [Direct play] button.f The [Direct play] screen is displayed.4 Select the remote control ID assigned with the playlist to play.f Select the remote control ID from the [Remote control ID assignment] on the top left of [Direct play] screen.f The [Direct play] screen display is updated.5 Set the [Duration], [Group settings] and [Playback destination].f Group is the unit that simultaneously perform the playback using the multiple direct play function on multipleprojectors connected to the network within the same segment.f About the group set at [Playback destination], refer to “The playback image of multiple direct play”(x page 98).6 Click the [Save] button.f The set [Group settings] is registered in the SD card.7 Click the [Play] button.f The playlist playback is started.Notef Because of the influence from the applied network environment, the start time of each machine may differ from each other.f If the content that first registered to the playlist of direct playback is still image content, the initial playback time of that still image contentshortens compared with the set time.f When the interruption playback is set during the playback using the multiple direct playback function, the interruption playback is registeredand the ongoing direct playback is terminated. For the setting of the interruption playback, refer to “Setting the interruption playback”(x page 105).
