Panasonic PT-L711XNTU Operating Instructions Manual

Contents

Panasonic PT-L711XNTU Operating Instructions Manual Manual pdf 23 page image

-23-LOCK SETUPThe LOCK SETUP setting is automatically changed to ON after the SETUPfunction has been used, in order to prevent accidental changes from beingmade to the LAN settings.When LOCK SETUP is ON, the SETUP function cannot be used. Beforeusing the SETUP function, you need to change the LOCK SETUP settingto OFF.Use the F or G button to select “LOCKSETUP”, and then press the I or Hbutton to change the setting.SETUPIn order to make it easier to configure the projector’s network settings, theSETUP function displays the following setting screens in order from # to-.Before using the SETUP function, use the “SELECT SETUP” menu toselect the LAN settings that you would like to make or change. Also checkthat “LOCK SETUP” is OFF.Use the F or G button on the projector orremote control unit to select “SELECTSETUP”, and then press the ENTERbutton to start making the settings.Note:• When the final settings are made, “WAIT A MINUTE” appears briefly,and then the LAN is reset.• If you press the MENU button at any time before the final settings havebeen made, all setting changes will be discarded and the previoussettings will be restored.#### SELECTThe projector can store up to fivedifferent types of LAN settings.This is useful when using theprojector in different places withdifferent network environments.Use the I or H button to selectthe desired type of setting and thenpress the [ENTER] button.S E T U PS E L E C TL A N 1L A N 2L A N 3L A N 4L A N 5L A N S E T U PS T A T U S L A N 1L O C K S E T U P O F F O NS E T U PS E L C T A D J E S CL A N S E T U PS T A T U S L A N 1L O C K S E T U P O F F O NS E T U PS E L C T E N T E R E S C