Panasonic PT-L712NTE Operating Instructions Manual

Also see for PT-L712NTE: Operating instructions

Contents

Panasonic PT-L712NTE Operating Instructions Manual Manual pdf 15 page image

-15-(2) If already using computers for wirelesstransmission (Ad Hoc mode)Use the existing wireless cards for the computers to carry out directwireless communication with the projector in Ad Hoc mode.Computer Projector ComputerSetting procedureSet the computer and the projector according to the following procedure.Preparation &settingsCheck communication Transmitimages Inserting thewireless card (page18)LAN settings (page21)Use WirelessManager to checkcommunication withthe projector (page40)Use WirelessManager totransmit theimages (page41)Setting exampleSetting item Projector LAN settingsIP ADDRESS Set the computer IP address to an address with thelast number different.e.g. If the computer IP address is 192.168.10.11, setthe projector’s address to something like192.168.10.12.SUBNET MASK Use the same setting for the computer.MODE AD HOCCHANNEL Use the same setting for the computer.Note:• The computer settings can be used without further changes. However, ifusing the WEP function, communication with the projector will not bepossible. You will first need to turn off the WEP function for all computerswhich are to communicate with the projector.Furthermore, when the WEP function is turned off, the data encryptionfunction will also be turned off, so it is recommended that you use afeature such as the Sharing Settings for folders to set passwordprotection for your data. Ask your network administrator for furtherdetails.• If you any wireless cards other than the optional ET-CDWL1 series,correct operation cannot be guaranteed.