4Check your computerNecessary environment for computers to be connectedFirst, check your computer to see whether or not it has a wired LAN• function.LAN : “Glossary” (See page 18)Before connecting the computer to the projector, be sure to check the following settings.•Check 1 For LAN cableIs the cable properly connected?• Use LAN cable that is compatible with category 5 or above.•Check 2 Wired LAN settingsIs your wired LAN switched on?•Is your wired LAN adapter properly recognized?• Is your wired LAN adapter switched on?• Install the wired LAN adapter driver beforehand.• For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.Check 3 For WebBrowserWebBrowser is necessary to use WEB control.• Compatible OS : Windows XP/Windows Vista/Windows 7• Mac OS X v10.4/v10.5/v10.6Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0• Safari 2.0/3.0/4.0Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our hand (body)causing a malfunction.Connecting with Wired LANConnection can be made with wired LAN. However, confirm to your system administrator on network settings before changingany settings.Turn on the computer.1 Make the network setting according to your system administrator.2 If the projector settings are the default settings (See page 6), the computer can be used with the following networksettings.IP ADDRESS 192.168.10.101SUBNETMASK 255.255.255.0DEFAULT GATEWAY 192.168.10.1