Panasonic PT-LB20NTU Operating Instructions Manual

Also see for PTLB20NTU - PROJECTOR- NETWORK IB: Operating instructions Specifications Service manual User guide Operating instructions

Contents

6-E NGLISHPrecautions with regard to safetyWARNINGIf you notice smoke, strange smells or noise coming from theprojector, disconnect the power cord plug from the wall outlet.B Do not continue to use the projector in such cases, otherwise fire orelectric shocks could result.B Check that no more smoke is coming out, and then contact an AuthorizedService Center for repairs.B Do not attempt to repair the projector yourself, as this can be dangerous.Do not install this projector in a place which is not strong enough totake the full weight of the projector.B If the installation location is not strong enough, it may fall down or tip over,and severe injury or damage could result.Installation work (such as ceiling suspension) should only be carriedout by a qualified technician.B If installation is not carried out correctly, there is the danger that injury orelectric shocks may occur.If foreign objects or water get inside the projector, or if the projector isdropped or the cabinet is broken, disconnect the power cord from thewall outlet.B Continued use of the projector in this condition may result in fire or electricshocks.B Contact an Authorized Service Center for repairs.Do not overload the wall outlet.B If the power supply is overloaded (for example, by using too manyadapters), overheating may occur and fire may result.Do not remove the cover or modify it in any way.B High voltages can cause fire or electric shocks.B For any inspection, adjustment and repair work, please contact anAuthorized Service Center.Clean the power cord plug regularly to prevent it from becomingcovered in dust.B If dust builds up on the power cord plug, the resulting humidity candamage the insulation, which could result in fire. Pull the power cord plugout from the wall outlet and wipe it with a dry cloth.B If not using the projector for an extended period of time, pull the powercord plug out from the wall outlet.Do not do anything that might damage the power cord or the powercord plug.B Do not damage the power cord, make any modifications to it, place it nearany hot objects, bend it excessively, twist it, pull it, place heavy objects ontop of it or wrap it into a bundle.Downloaded From projector-manual.com Panasonic Manuals