E NGLISH -29POWER button on the projectorPOWER button statusRed Illuminated The projector is in standby mode and image projectionis possible by pressing the POWER button.A picture is being projected.The lamp is cooling down after the power has beenturned off or while direct power off function isoperating.The projector is preparing for projection after thepower has been turned on while the POWER buttonon the projector is illuminated orange. (After a shortperiod, a picture will be projected.)The projector is preparing for projection after thepower has been turned on while the POWER buttonon the projector is illuminated red. (After a shortperiod, a picture will be projected.)FlashingIlluminatedIlluminatedFlashingGreenOrangeProjector statusDirect power off functionYou can disconnect the mains lead during projection or immediately afteruse and move the projector. The cooling fan will operate by the internalpower supply to cool down the lamp.B When this function is used, it may take more time for the lamp to turn backon again compared to when the lamp cools down with the mains leadconnected.B Do not put the projector in a bag while the POWER button on theprojector is illuminated.CAUTIONIf not using the projector for an extended period of time, disconnect themains plug from the mains socket.B If dust builds up on the mains plug, the resulting humidity may damage theinsulation, which could result in fire.B This projector continues to draw approximately 4 W of power even whenthe power is turned off.Basic operation