Panasonic PT-LB50NTE Function Manual

Also see for PT-LB50NTE: Operating instructions Operating instructions Specifications

Contents

Panasonic PT-LB50NTE Function Manual Manual pdf 27 page image

27Various projection methods (cont.)Check the status indication on the launcher to makesure that transmission is possible (check that thegreen lamp is lit).2Press the [MULTI-LIVE SELECT] button on the remotecontrol to turn the projection screen into a full screendisplay (the status when no index window is displayed).If you press the [MULTI-LIVE SELECT] button once or twice when indexwindows are displayed on the projection screen, the screen will switch over toa full screen display.1Click [ ] on the launcher.The window shown to the right appears.3Select and click the projection position.The computer image is transmitted to the selected quarterof the projection screen.4Switching to a different positionSelect and click a different projection position instep 4 above.Enlarged displayIf [ ] is clicked with a computer, projector screenstemporarily change to full screen display. To returnto the original display, click [ ] with the computerthat click [ ] and select original projection positionswith each computer.Quitting 4-screen multi styleSelect and click the checked position in step 4above.• In the 4-screen multi style, the computer screens from all the computers connected tothe projector can be transmitted to the projector. (If an image from another computerhas been sent to the image position where an image is already displayed, the existingimage is replaced by the new image.)• If the connection error occurs during projection, the message ‘Stop “Live mode”’ willappear, then restart projection by clicking launcher buttons.• Picture quality or other options can be set on the “Option” window by clicking [ ] onthe launcher.4-screen multi styleConnect up to four computers to one projector, and then divide the projector screeninto four parts, and simultaneously display the screens for the four computers on theprojector screen.