Panasonic PT-LB51NTE User Manual

Also see for PT-LB51NTE: Operating instructions Operating instructions Service manual Quick guide Quick guide

Panasonic PT-LB51NTE User Manual Manual pdf 31 page image

31Select [STATUS] at the wireless menu and press the [ENTER] button.Your current settings appear.Verifying settingsPT-LB51NTEUSER1RETURNENTERSELECTLANGUAGEOPTIONSECURITYPOSITIONPICTURENAME CHANGEINPUT PASSWORDPASSWORD CHANGEWEB CONTROLOFFONLIVE MODE CUT INSTATUSINITIALIZENETWORKWIRELESSOFFNetwork setting of the projector (cont.)You can return the changed settings to the initial conditions.Select [INITIALIZE] at the wireless menu and press the [ENTER] button.1Select [OK] with the [ ] buttons and press the [ENTER]button.2PT-LB51NTERETURNSELECTENTERUSER1OFFONNAME CHANGEINPUT PASSWORDPASSWORD CHANGEWEB CONTROLLIVE MODE CUT INSTATUSINITIALIZELANGUAGEOPTIONSECURITYPOSITIONPICTURE NETWORKWIRELESSOFFINITIALIZERETURNENTERSELECTINITIALIZEOK CANCELReturning to the Initial SettingsYou will be prompted to enter the password if [ON] has been selected as the [INPUT PASSWORD] setting on the[ SECURITY] menu.The status of the following will appear.ANTENNA LEVEL (The strength of the connection will appear.)NETWORK “DISABLE”, “– – –”, “1” - “ 4”, “USER1” - “USER3”MODE “AD-HOC” - “INFRASTRUCTURE”CHANNEL Refer to page 5 for usable channels.SSID (See page 27)AUTHENTICATION “OPEN” - “SHARED” - “WPA-PSK”DEFAULT KEY “-” - “1” - “4”ENCRYPTION “NONE” - “WEP” - “TKIP” - “AES”DHCP “OFF” - “ON”IP ADDRESS (See page 28)SUBNETMASK (See page 28)GATEWAY (See page 28)MAC ADDRESS