Panasonic PT-LB75VE Operating Instructions Manual

Also see for PT-LB75VE: Brochure & specs Operating instructions

Contents

Panasonic PT-LB75VE Operating Instructions Manual Manual pdf 25 page image

Projecting an imageBasic OperationENGLISH - 25Projecting an image&RQ¿UPWKHFRQQHFWLRQVRIWKHSHULSKHUDOGHYLFHV(¨page 19, 20) and mains lead (¨page 21). Switch on thepower (¨page 23) and the projector starts projecting. Select the input signal and adjust the image.Selecting the input signal1 ) Switch on the connected devices.When playing a connected DVD player, if SIGNAL6($5&+ in the DISPLAY OPTION menu is setto ON, the input signal is detected and projectedautomatically when the projector is switched on.(¨page 39)Set thez INPUT GUIDE under the ON-SCREENDISPLAY in the DISPLAY OPTION menu toDETAILED. If the projector cannot detect anyinput signal, the Computer connection guidancewill display. (¨page 38)2 ) Select an input signal.The image selected with the INPUT SELECTbutton is projected. (¨page 26)NoteChange the setting of thez PICTURE menuaccording to the connected device and DVD, videotape, etc., to be played. (¨page 33)&RQ¿UPWKHDVSHFWUDWLRRIWKHVFUHHQDQGLPDJHzSelect the optimum aspect ratio. (¨page 35)Positioning the image:KHQVHWWLQJXSWKHSURMHFWRUIRUWKH¿UVWWLPHRUVHWWLQJXSDWDQHZSODFH\RXPXVWSHUIRUPWKHIROORZLQJRSHUDWLRQV1 ) Adjust the vertical angle of the projector.Place the projector at the right angle from the screen.zPress the adjuster buttons and adjust the vertical projection angle. Then, adjust the projected image to thezcentre of the screen.2 ) $GMXVWWKHSURMHFWLRQVL]HDQGIRFXVRemove the Zoom-Focus ring coverz (¨page 14) and turn the zoom and focus rings to adjust the projectedimage. After adjusting, be sure to install the Zoom-Focus ring cover to protect from dust.Zoom ring(ZOOM)Focus ring(FOCUS)5HPDUNVWhen you adjust the zoom after adjusting the focus, you may need to adjust the focus of the image again.zIf keystone distortion occurs, see “KEYSTONE”.z (¨page 34)