66Frequently Asked QuestionsCheck the following points once more before requesting repair.No wireless connection can be made between my projector and my computer.•Is Wireless Manager ME 5.5 running?Wireless Manager ME 5.5 must be started in the computer in order to enable wireless transmissions of images to theprojector.•When the user does not have the [Admin (administrator)] authority, the [Admin (administrator)]’s name and passwordare required to make network settings.When connecting with Network number [U (user)], make sure whether wireless menu setting of the projector is corrector not. (See page 48)I get dropped from the network.• Did the projector enter [Sleep] mode?If the projector goes to [Sleep] and is disconnected from the network, quit and restart Wireless Manager ME 5.5.•Did you connect to the network via an Easy Wireless Set Up (Network [1], [2], [3], [4], [S-MAP] or [PC Search]),use Wireless Manager ME 5.5 and then quit the application?The projector can be disconnected from the network if you connect via an Easy Wireless Set Up ([1], [2], [3] or [4]), useWireless Manager ME 5.5 and then quit the application.Set up your wireless LAN again.I cannot connect to the network via an Easy Wireless Set Up.•<[1] to [4] or [U (user)] cannot be selected in access point searches despite selecting [Wireless LAN].>Is Wireless Manager ME 5.5 installed in the [Applications] folder?For an Easy Wireless Set Up, Wireless Manager ME 5.5 must be installed in the [Applications] folder (./Applications).I cannot lower the display brightness.•Is a checkmark placed in the [Disable Screen Saver] checkbox?The brightness of the built-in display cannot be lowered if a checkmark appears in the [Disable Screen Saver] checkboxof the I cannot hear sound.•After installing the software, always reboot the system. (See page 12)•Sound is not output if the driver has been uninstalled. (See page 63)