Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 65Setting [INPUT GUIDE]Set display of the input guide (display of the currently selected input terminal name, signal name, and memory number) in the position set bythe [OSD POSITION].1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [INPUT GUIDE].4) Press qw to switch [INPUT GUIDE].f The items will switch each time you press the button.[ON] Displays the input guide.[OFF] Does not display the input guide.Setting [WARNING MESSAGE]Set the display/hide of the warning message.1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [WARNING MESSAGE].4) Press qw to switch [WARNING MESSAGE].f The items will switch each time you press the button.[ON] Displays the warning message.[OFF] Does not display the warning message.[CLOSED CAPTION SETTING] (NTSC input only)Set closed captions.Selecting the closed caption display1) Press as to select [CLOSED CAPTION SETTING].2) Press the button.f The [CLOSED CAPTION SETTING] screen is displayed.3) Press as to select [CLOSED CAPTION].4) Press qw to switch [CLOSED CAPTION].f Switch to [OFF] or [ON].[OFF] Closed captions are not displayed.[ON] Closed captions are displayed.f When [ON] is selected, proceed to Step 5).5) When the confirmation is displayed, select [OK] or [CANCEL], and press the button.Setting the closed caption display1) Press as to select [CLOSED CAPTION SETTING].2) Press the button.f The [CLOSED CAPTION SETTING] screen is displayed.3) Press as to select [MODE].
