Panasonic PT-VX400NTU Brochure

Also see for PT-VW330: Specification sheet Brochure & specs Dimensional drawing Overview Specifications

Contents

Panasonic PT-VX400NTU Brochure Manual pdf 6 page image

350 (13-3/4) 277 (10-7/8)97 (3-7/8)Lower edge of projected imageUpper edge of projected imageLProjected imageLHHReplacement lamp unitET-LAV100Replacement filter unitET-RFV100Ceiling mountbracket forhigh ceilings*¹⁰ET-PKV100HCeiling mount bracketfor low ceilings*¹⁰ET-PKV100SBracket assemblyET-PKV100BModel PT-VW330 PT-VX400NT PT-VX400Power supply 100-240 V AC, 50/60 HzPower consumption322 W (0.48 W when standby modeset to Eco*¹, 12.5 W when standbymode set to Network.)322 W (0.48 W when standby modeset to Eco*¹, 14.5 W when standbymode set to Network.)322 W(0.48 W when standby modeset to Eco*¹, 10.0 W when standbymode set to Network.)LCD panelPanel size 15 mm (0.59 inches)diagonal (16:10 aspect ratio) 16 mm (0.63 inches) diagonal (4:3 aspect ratio)Display method Transparent LCD panel (x 3, R/G/B)Pixels 1,024,000 (1,280 × 800) x 3,total of 3,072,000 pixels 786,432 (1,024 × 768) x 3, total of 2,359,296 pixelsLens 1.6x manual zoom (throw ratio: 1.2–1.9:1), manual focus, F 1.65–2.33, f 15.47–24.53 mmLamp 245 W × 1, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 3,000 hours/5,000 hours*²Screen size (diagonal) 0.76–7.62 m (30–300 inch)Brightness*³ 3,000 lm (lamp power: Auto/Normal) 4,000 lm (lamp power: Auto/Normal)Center-to-corner uniformity*³ 85%Contrast*³ 2,000:1 (full on/full off, lamp power: Auto)Resolution 1,280 × 800 pixels*⁴ 1,024 × 768 pixels*⁵ScanningfrequencyHDMI fH: 25–80 kHz, f V: 50–85 Hz, dot clock: 162 MHz or lowerRGB (analog) fH: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower(Signals exceeding the dot clock rate of 140 MHz are downsampled.)YPBPR (YCBCR)fH: 15.75 kHz, fV: 60 Hz [480i(525i)]fH: 31.50 kHz, fV: 60 Hz [480p(525p)]fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]fH: 15.63 kHz, fV: 50 Hz [576i(625i)]fH: 31.25 kHz, fV: 50 Hz [576p(625p)]fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]Video/S-Video fH: 15.75 kHz, f V: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, f V: 50 Hz [PAL/PAL-N/SECAM]Optical axis shift 49:1 9:1Keystone correction range Vertical: ±30°(±20° when Real-Time Keystone)Vertical: ±40°, Horizontal: ±30°(Vertical: ±30°, Horizontal: ±20° whenAuto Keystone)Vertical: ±30°(±20° when Real-Time Keystone)Installation Ceiling/floor, front/rearTerminalsHDMI INHDMI 19-pin x 1 (compatible with HDCP)480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*⁶,compatible with non-interlaced signals only, dot clock: 25 -146.25 MHzCOMPUTER IN 1 D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)COMPUTER IN 2 /MONITOR OUTD-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)VIDEO IN RCA pin × 1 (Composite VIDEO)S-VIDEO IN Mini DIN 4-pin × 1 (S-VIDEO)AUDIO IN RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO inputCOMPUTER AUDIO IN 1 M3 x 1 (L-R x 1)COMPUTER AUDIO IN 2(MIC IN) M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)AUDIO OUT M3 x 1 (L-R x 1) for output (variable)SERIAL IN D-sub 9-pin (male) × 1 for external control (RS-232C compliant)LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))USB A — USB type-A (for the USB MemoryViewer) x 1 —USB B — USB type-B (for the USB Display/Wireless Mouse) x 1 —Built-in speaker 3.7 cm round shape × 1, output power: 10.0 W (monaural)Noise level 35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)Cabinet materials Molded plasticDimensions (W × H × D) 350 x 97 x 277 mm (13.8” x 3.8” x 10.9”) (with legs at shortest position, not including protruding parts)Weight Approximately 3.5 kg (7.7 lbs) Approximately 3.6 kg (7.9 lbs) Approximately 3.5 kg (7.7 lbs)Operating environment Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20%-80% (no condensation)WirelessStandard — IEEE802.11b/g/n —Infrastructure mode —WPA-PSK (TKIP/AES), WPA2-PSK(TKIP/AES), 128 bit/64 bit WEP,WPA-EAP/WPA2-EAP(PEAP[MS-CHAPv2/GTC],EAP-FAST [MS-CHAPv2/GTC],EAP-TTLS[MD5/MS-CHAPv2])—Ad-hoc mode*⁷ — 128 bit/64 bit WEP —Supplied accessoriesPower cord x 1*⁸, wireless remote control unit, batteries (AAA/R03/LR03 type × 2),carrying bag x 1, RGB cable x 1, filter coverSoftware CD-ROM (Logo Transfer Software,Multi Projector Monitoring &Control Software)Software CD-ROM (Logo Transfer Software,Multi Projector Monitoring & ControlSoftware, Wireless Manager ME 5.5)Software CD-ROM (Logo Transfer Software,Multi Projector Monitoring &Control Software)Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.Product availability differs depending on region and country. This product may be subject to export control regulations.The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, pleaseconsult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, theUnited States, and other countries and regions or registered trademarks. All other trademarks are the property of their respectivetrademark owners. Projection images simulated.© 2011 Panasonic Corporation. All rights reserved. PT-VW330G2 Printed in Japan.All information included here is valid as of December 2011.Diagonalimage sizeProjection distance (L) Height from theedge of screen tocenter of lens (H)min.(wide) max.(tele)0.76 [30"] 0.7 (2.3) 1.2 (3.9) 0.01 (0.03)1.02 [40"] 1.0 (3.3) 1.6 (5.2) 0.01 (0.03)1.27 [50"] 1.3 (4.3) 2.0 (6.6) 0.01 (0.03)1.52 [60"] 1.5 (4.9) 2.5 (8.2) 0.02 (0.07)1.78 [70"] 1.8 (5.9) 2.9 (9.5) 0.02 (0.07)2.03 [80"] 2.0 (6.6) 3.3 (10.8) 0.02 (0.07)2.29 [90"] 2.3 (7.5) 3.7 (12.1) 0.02 (0.07)2.54 [100"] 2.5 (8.2) 4.1 (13.5) 0.03 (0.1)3.05 [120"] 3.1 (10.2) 4.9 (16.1) 0.03 (0.1)3.81 [150"] 3.8 (12.5) 6.2 (20.3) 0.04 (0.13)5.08 [200”] 5.1 (16.7) 8.0 (26.2)*⁹ 0.05 (0.16)6.35 [250"] 6.4 (21.0) 8.0 (26.2)*⁹ 0.07 (0.23)7.62 [300"] 7.7 (25.3) 8.0 (26.2)*⁹ 0.08 (0.26)PT-VW330(16:10 aspect ratio; throw ratio: 1.2–1.9:1)Diagonalimage sizeProjection distance (L) Height from theedge of screen tocenter of lens (H)min.(wide) max.(tele)0.76 [30 "] 0.7 (2.3) 1.1 (3.6) 0.05 (0.16)1.02 [40 "] 1.0 (3.0) 1.5 (4.9) 0.06 (0.2)1.27 [50 "] 1.2 (3.9) 1.9 (6.2) 0.08 (0.26)1.52 [60 "] 1.4 (4.6) 2.3 (7.5) 0.09 (0.3)1.78 [70 "] 1.7 (5.6) 2.7 (8.9) 0.11 (0.36)2.03 [80 "] 1.9 (6.2) 3.1 (10.2) 0.12 (0.39)2.29 [90 "] 2.2 (7.2) 3.5 (11.5) 0.14 (0.46)2.54 [100 "] 2.4 (7.9) 3.9 (12.8) 0.15 (0.49)3.05 [120 "] 2.9 (9.5) 4.7 (15.4) 0.18 (0.59)3.81 [150 "] 3.6 (11.8) 5.8 (19.0) 0.23 (0.75)5.08 [200 "] 4.8 (15.7) 7.8 (25.6) 0.31 (1.02)6.35 [250 "] 6.0 (19.7) 8.0 (26.2)*⁹ 0.38 (1.25)7.62 [300 "] 7.2 (23.6) 8.0 (26.2)*⁹ 0.46 (1.51)PT-VX400NT/VX400(4:3 aspect ratio; throw ratio: 1.2–1.9:1)Projection distance unit: meters (feet)Dimensions unit: mm (inch) Optional accessories*1 When the Standby mode is set to Eco, network functions such asstandby on via LAN are not available. Also, only certain commandscan be received for external control using the serial terminal.*2 The values given for the recommended lamp replacement cyclesare maximum. *3 Measurement, measuring conditions, and methodof notation all comply with ISO 21118 international standards.*4 Input signals that exceed this resolution will be converted to1,280 x 800 pixels. *5 Input signals that exceed this resolution will beconverted to 1,024 x 768 pixels. *6 Compliant with VESA CVT-RB.*7 Not supported by IEEE802.11n. *8 Power cords available (x 2) forthe PT-VW330EA/VX400NTEA/VX400EA. *9 There is no guarantee ofthe lens performance when the projection distance exceeds 8.0 m(26.2 feet).Specifications*10 This product is used together with an optional bracket assembly (sold separately).http://panasonic.net/avc/projectorFor more information about Panasonic projectorsDo not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.Caution1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a poppingsound, or fail to illuminate, due to impact or extended use.2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:• Never place objects on top of the projector while it is in operation.• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.• If stacking projector units, care must be taken to provide the recommended space between units. These spacerequirements also apply to installation where only one projector unit is operating at one time and the other unit is usedas a backup.• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match theoperating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaustopenings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings beingrecirculated into the intake opening.3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.• The brightness of the lamp will gradually decrease with use.4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.NOTE ON USE

/ 6

Related manuals for Panasonic PT-VW330