| 
Basic operations by using the remote controlENGLISH - 39 Basic OperationUsing the FREEZE functionYou can freeze the projected image and stop thesound temporarily, regardless of the playing conditionof the connected device.ButtonPress the button on the remote control tofreeze the picture on the screen, meanwhile, volumeis muted. To cancel the Freeze function, press the button again or press any other button.Fig.1 will appear on the screen while the Freezefunction is working.Fig.1NoteWhen no signal inputs,z mark will appear.Using the AV MUTE functionButtonPress the < AV MUTE> button on the remote controlto black out the image. To restore to normal, press the< AV MUTE> button again or press any button.When the Logo is not set, the screen changes each timezyou press the < AV MUTE> button as follows.The projected Logo (the logo can be set accordingzto users’ favorite) is transferred from computer tothe projector by “Logo Transfer Software” on thesupplied CD-ROM and is set as [User] in the Logoselection (Æpage 58), the screen changes eachtime you press the < AV MUTE> button as follows.NoteWhen use the button to release the [z AV mute]function, the mute function can not be operated at thesame time.Using the SCREEN buttonThis function allows you to select screen mode orchange the screen size.ButtonPress the button on theremote control.NoteFor details, see “Screen” of Main menu. (z Æpage 52)Using the P-TIMER buttonPress the button on the remote control tooperate the [Count up]/[Count down] function.ButtonPress button on the remotecontrol.NoteTo stop the count time, press the button.zTo cancel the [P-timer] function, press and hold the button. (Æpage 60)Using the LAMP buttonThis function allows you to select the lamp mode forchanging the brightness on the screen.ButtonPress button on the remotecontrol.NoteFor details, see “Lamp Power” of "Setting" under Mainzmenu. (Æpage 61)black out projected imageLogoblack out projected image |
