Panasonic PTAE2000 Operating Instructions Manual

Also see for PT-AE2000: Specification sheet Spec file

Contents

Technical InformationENGLISH - 49 AppendixJ Communication settingsJ Control commandsSignal level RS-232C Character length 8 bitsSync. method Asynchronous Stop bit 1 bitBaud rate 9 600 bps X parameter NoneParity None S parameter NoneCommand Control contents RemarksPON POWER ON In standby mode, all commands other than the PON command are ignored.The PON command is ignored during lamp ON control.POF POWER OFF If a PON command is received while the cooling fan is operating after the lamp has switchedoff, the lamp is not turned back on again straight away in order to protect the lamp.IIS INPUTParameter:CP1 = COMPONENT1 INSVD = S-VIDEO INHD1 = HDMI1 INHD3 = HDMI3 INCP2 = COMPONENT2 INVID = VIDEO INHD2 = HDMI2 INRG1 = COMPUTER INOMN MAIN Displaying the main menu.OEN ENTER Activating the selected items in the menu mode.OBK RETURN Returning to the previous menu or escaping from the menu mode.OCU/OCD/OCL/OCR Navigation buttons OCU = F buttonOCD = G buttonOCL = I buttonOCR = H buttonOLE LENS Activating the LENS CONTROL menu.OST DEFAULT Resetting to the factory default setting. (page 22)OFZ FREEZEFreezing the projected screen.Parameter:0 = OFF 1 = ONOOT SLEEPSetting the duration of time to turn off the power automatically. (page 25)0 = OFF 1 = 60min. 2 = 90min. 3 = 120min. 4 = 150min.5 = 180min. 6 = 210min. 7 = 240min.OSH BLANKTurning off the projection temporarily.Send the command to switch between ON and OFF.Do not send the command consecutively.OVM PICTURE Activating the PICTURE menu. Send the command to switch menu items. (page 25)OWM WAVEFORMActivating the WAVEFORM.Parameter:0 = OFF1 = FULL SCAN (Y)2 = FULL SCAN (R)3 = FULL SCAN (G)4 = FULL SCAN (B)(page 24)5 = SINGLE LINE SCAN (Y)6 = SINGLE LINE SCAN (R)7 = SINGLE LINE SCAN (G)8 = SINGLE LINE SCAN (B)VS1 ASPECT Switching the aspect ratio. (page 23)VPM PICTURE MODESwitching the PICTURE MODE. (page 25)Parameter:NOR = NORMAL DYN = DYNAMIC CL1 = COLOR1 CL2 = COLOR2CN1 = CINEMA1 CN2 = CINEMA2 CN3 = CINEMA3