Panasonic PV-A208 Operating Instructions Manual

Also see for Palmcorder PV-A208: Operating instructions

Playing Back your RecordingsPlayback using the Color EVFSpecial Effects PlaybackTo rapidly locate a scenePress FAST FORWARD/SEARCH orREWIND/SEARCH for rapid visual search.Press again, or press PLAY to resumenormal speed.View a Still PicturePress STILL to freeze the picture.Press again to resume normal playback.This feature works best in SLP mode (seepages 12, 22).Note:• During search playback, horizontal noise barswill appear and there will be no audio.• To protect the tape and the video heads, yourCamcorder's operating modes will revert asfollows:STILL STAND-BY after 5 minutes.STANDBY -»> POWER OFF after 5 minuteswhen using a Battery Pack.• When the tape reaches its end during playback,or fast forward, it will rewind automatically.26Before you begin...* Connect the Camcorder to a power source.• insert a recorded cassette.1 Set the POWER switch to VCR.2 ® Press the REWIND/SEARCHbutton to rewind the tape.® Press PLAY to start playback.© Press STOP to stop playback.Auto PlayWhen the POWER switch is set to VCR,playback will automatically begin if therecord tab has been removed on thecassette.Search SpeedStandard Play (SP) Search is about 3times the normal speed, and Super LongPlay (SLP) Search is about 9 times thenormal speed.Tracking ControlAuto TrackingContinuously analyzes the signal of eachrecording for optimum picture quality.Manual TrackingTo minimize the noise in some recordings,manual tracking may be necessary.In Playback mode:Press UP or DOWN T until pictureclears.Press DISPLAY to return to Auto Tracking.