Panasonic PV-GS320 Operating Instructions Manual

Also see for Palmcorder PV-GS320: Brochure & specs Operating instructions

Panasonic PV-GS320 Operating Instructions Manual Manual pdf 22 page image

Record mode30LSQT1091≥When connected with the USB cable or theDV cable to a personal computer or otherequipment≥When in PC Connection ModeRecording checkThe last image recorded is played back for 2 to3 seconds. After checking, the Camcorder will beset to a recording pause.≥Set to Tape Recording Mode.1 Press the joystick to display the icon duringthe recording pause. Move the joystickdown until icon 1appears.2 Move the joystick left to select therecording check icon [ ].≥The [RECORDING CHECK STARTED]indication appears on the screen of theCamcorder.Blank search functionSearches for the last part of the image recorded(unused part of the tape). After the search isfinished, the blank search function is canceledand the Camcorder is put into recording pause.≥Set to Tape Recording Mode.1 Press the joystick to display the icon duringthe recording pause. Move the joystickdown until icon 1appears.2 Move the joystick right to select the blanksearch icon [ ].3 When the confirmation message appears,select [YES] and press the center of thejoystick.ªStopping blank search midwaythroughMove the joystick down to select the [∫] icon.≥If the cassette tape has no blank part, then theCamcorder will stop at the end of the tape.≥The Camcorder stops at a point approx.1 second before the end of the last imagerecorded. When you start recording at thatpoint, the image can be recorded seamlesslyfrom the last image.Recording still pictures on a cardwhile recording image onto a tapeYou can record still pictures while recordingimage onto a tape.≥Set to Tape Recording Mode.1 Press the Photoshot button [ ] fully whilerecording image onto a tape.≥For the number of still pictures that can berecorded on a card, refer to -78-.≥When recording pictures onto a card, therecording start/stop button is disabled.≥You can select the picture quality for stillpictures to be recorded. (-32-)≥In order to record higher quality still pictures,you must use the card recording mode.≥When recording still pictures, hold theCamcorder firmly with your hands and keepyour arms stationary at your side so as not toshake the Camcorder.ªSelect the size of still pictures to berecorded on a card in Tape RecordingMode1 Set [ADVANCED] >> [PICTURE SIZE] >>select the desired picture size.ASPECT [16:9]::1280k720:640k3601110.2