45For Your InformationOperation NotesAttaching Optional Filters and LensesLens Hood Area Operation CautionWith a Wide or Telephoto conversion lens (optional) attached, the four corners of thescreen may darken when zoom is set to maximum wide angle.When attaching the lens hood, a Wide or Telephoto conversion lens (optional), etc. aftera filter (optional) has been attached, the four corners of the screen may darken whenzoom is set to maximum wide angle.With two filters (optional) attached, the four corners of the screen may darken when zoomis set to maximum wide angle.When you remove the Lens Hood, pinch the Lens Hoodand turn it counterclockwise as illustrated at right.Then attach an optional filter or lens.• Be careful not to touch the lens itself.• Replace the Lens Hood after removing the accessory.Cleaning EVF (Electronic Viewfinder)1 Turn the EVF Eyepiececounterclockwise 1/8 of a turn.3 To re-install EVFLine up the marks on the Eyepiecewith the grooves inside the EVFshaft and attach. Turn the EVFclockwise 1/8 of a turn to lock inplace.To Remove2 Pull free.Remove any lint or dust particleswith a soft clean cloth being carefulnot to scratch the glass surfaces.A B99.9.8, 6:53 PM45