Panasonic Palmcorder Multicam PV-DV73 Operating Instructions Manual

Contents

Panasonic Palmcorder Multicam PV-DV73 Operating Instructions Manual Manual pdf 15 page image

15Before Use1 Slide the Battery downward whilesliding BATT RELEASE to remove theBattery Pack. (p. 14)2 Insert the DC Cable into the DC INTerminal.3 Connect the other end of the DCCable to the AC Adaptor as shown.4 Plug in the AC Adaptor.• The POWER Lamp on the ACAdaptor lights up.• When not in use, unplug the AC Adaptorfrom the AC outlet. (AC Adaptor consumes1 W of electric power when plugged intoan AC outlet even when not in use.)DC Cable(Supplied)DC IN TerminalNote123POWERLampSupplying PowerCaution:• Charge only with specified charger.• Charge the Battery within an ambienttemperature range of 10 °C (50 °F) and30 °C (86 °F).• The Battery may be warm after charging or justafter use. This is normal.• Do not use an insufficiently charged or worn outBattery.• If charging is done in extreme low or hightemperatures, Battery charge time increases.Safety precautions:• Do not place the Battery near, or dispose of in fire.• Do not directly connect (short circuit) the positive(+) and negative (–) terminals.• Never attempt to disassemble or reassemble theBattery.To avoid damage to the Battery:• Do not drop or jar the Battery.• Use the Battery with specified models only.• If the Battery is used in extremely hightemperatures, a safety device will automaticallyprevent operation.To ensure longer battery life:• While not in use, remove Battery from thePalmcorder and AC Adaptor and store in acool, dark, dry place. If you leave the Battery inthe Palmcorder or on the AC Adaptor, the Batterywill no longer be rechargeable.• Keep the Battery terminals clean.Battery CareDC Output Connector23Use AC AdaptorBATT RELEASEA lithium ion/polymer battery that is recyclable powers the productyou have purchased. Please call 1-800-8-BATTERY for informationon how to recycle this battery.U.S.A. CONSUMERS: ATTENTION:1