Record mode37LSQT1121Recording in natural colors(White balance)The automatic white balance function may notreproduce natural colors depending on thescenes or lighting conditions. If so, you can adjustthe white balance manually.≥Set to Tape/Card Recording Mode.1 Set the [AUTO/MANUAL/FOCUS] switch to[MANUAL].2 Move the joystick up to select the whitebalance icon [ ].3 Move the joystick left or right in order toselect the white balance mode.1) Auto white balance adjustment [ ]2) Indoor mode (for recording underincandescent lamps) [ ]3) Outdoor mode [ ]4) Manual adjustment mode [ ]ª To restore to the automaticadjustmentMove the joystick left or right until the [ ]indication appears. Or, set the [AUTO/MANUAL/FOCUS] switch to [AUTO].≥When the Camcorder is turned on with the lenscap fitted, the automatic white balanceadjustment may not function properly. Please turnthe Camcorder on after removing the lens cap.≥When setting both the white balance and theiris/gain, set the white balance first.≥Whenever recording conditions change, re-setthe white balance for correct adjustment.ª To set the white balance manuallySelect [ ] in Step 3. Then, while viewing a whitesubject on the entire screen, move the joystick upto select the [ ] indication.≥The white balance is set when the [ ]indication stops flashing.ª About flashing of the [ ] indicationWhen the manual adjustment mode isselected≥Flashing indicates that the white balancepreviously adjusted is stored. This setting isstored until the white balance is adjusted again.When white balance cannot be set in themanual adjustment mode≥White balance may not be adjusted properly inthe manual adjustment mode in dark places. Ifrequired, use the auto white balance mode.Setting in the manual adjustment mode≥When the setting is completed, it will keep lit.ª About the white balance sensorThe white balance sensor detects the type of lightsource during recording.≥Do not cover the white balance sensor duringrecording, or it may not function properly.MNL1 111 AWB3)1) 2)4)AWBAWB