Panasonic Panaboard KX-BP800 Operating Instructions Manual

(1) Click (Setting) in the Desktop Drawing Tool.CCThe Marker/Eraser Setting dialog box will appear.(2) To change the width of the markers, either enter awidth in (Marker Width) at the right sideof the marker whose width will be changed or click the up/down arrows on the right side toset a desired width.To change the color of the markers, click (Marker Color) on the right side of themarker whose color will be changed. The Color dialog box will appear. Click the color youwant to change from among Basic colors, and click the [OK] button.To change the size of the eraser, either enter a size in (Eraser Radius) or clickthe up/down arrows on the right side to set a desired size.(3) Click the [OK] button.(4) A dialog box will appear where you can select whether or not to apply the new settings tohandwritten lines drawn up to now.Clicking [Yes] button will redraw the lines drawn up to that point using the new settings.Clicking [No] button will only reflect the new settings for any subsequently drawn lines.CThe marker width can be set in a range of 1 - 30 dots.CEven though the marker colors are changed, the colors of the Desktop Drawing Tool buttons and the mousecursor will not change.CThe eraser radius can be set in a range of 1 - 60 dots.CThese settings are effective until being changed.38Projector ModeCCChange Marker/Eraser settingsChange the width and color of the markers and the size of theeraser used in the Desktop Drawing Tool.The marker width and color can be changed for four markercolors.Remark:(1) Click (All Clear) in the Desktop Drawing Tool.CCA verification dialog box will appear.(2) Click the [OK] button to execute all clear.CCErase all handwritten lines on the Desktop