Panasonic Panaboard UB-5310 Operating Instructions Manual

Also see for Panaboard UB-5310: Brochure & specs Operating instructions Installation manual Specification sheet Operating instructions

Contents

Panasonic Panaboard UB-5310 Operating Instructions Manual Manual pdf 14 page image

14Screen Height AdjustmentThe screen can be adjusted at 3 levels except for the lowest level. The lowest level of the board attachment frame isdesigned for installation of the screen, so the printer cannot be attached at this level. Adjust the level of the screenunit as follows.Please lock the casters when you adjust the screen height. (Refer to page 5.)1 Loosen the height adjustment handles.2 Hang the step frame on the reinforce pipe.Lift the board attachment (lower) by stepping onthe step frame.Slide along the slide groove.Do not handle the tray.Adjust the screen height with two persons afterinstallation.3 Hang the screen in the desired slots of the slideplates.Do not use slot 4.Slot 4 cannot be used for screen height adjustment.Confirm both sides of the screen are hung in thesame height slots securely.Slot Adjustment Screen HeightSlot 1 Available 2000 mmSlot 2 Available 1875 mmSlot 3 Available 1750 mmSlot 4 Cannot be used –HeightadjustmenthandlesHeightadjustmenthandlesLiftSlidegrooveDownStep frameBoard attachment(lower)Reinforce pipeSlot 4Slot 3Slot 2Slot 1