Panasonic Panafax UF-7000 Fax Manual

Also see for Panafax UF-7000: Network connection Operating instructions Service handbook Service manual

Contents

13Getting To KnowYour MachineVentilationQ The machine should be installed in a well-ventilated area to minimize the ozone density in the air.HandlingQ Do not turn the Power Switch Off or open the Front Cover during copying/printing.Q Energy Saver Mode NoticeO When using the Printer Function (USB Local and Network Connections), we recommend that you leave the EnergySaver Mode in the initial factory default setting (Sleep mode). (See page 92)Q Key Operator PasswordO The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes requirethe Key Operator Password.For Key Operator: When setting up this machine, please consult with your authorized Panasonic dealer, anddecide on the Key Operator Password together, then record it and keep it in a safe place forfuture reference.Q Dept. (DEPARTMENT) CodeQ Number of CopiesThe maximum number of copies is up to 999 (3 digit with keypad). During the copy mode, if you input 4-8 digitnumbers, they will be interpreted as being a phone number and displayed on the LCD, then the machine will switch tothe Fax mode.Q Auto Reset TimerAs the initial setting for Auto Reset Time is 1 minute, selected operation mode returns to default operation mode (Fax)after 1 minute, if you wish to change this Auto Reset Time, set to Fax Parameter No.121. (See pages 113).When the Department Counter function is set up, the Dept. (Department) Code inputscreen is displayed on the LCD Display. A registered Department Code (1 to 8-digit) isrequired to gain access to each secured function, or the secured Fax/Scannerfunction(s) cannot be used. Please consult with the Key Operator regarding theDepartment Code(s) for the desired function.Procedures:(1) Input a registered department code (1 to 8-digit).(2) Press the SET or START Key.INPUT DEPT. CODE********1 to 8-digit