Panasonic Plasma TX-P42G15B Operating Instructions Manual

Also see for VIERA TX-P42G15B: Brochure & specs Service manual Service manual Service manual Service manual

Contents

Panasonic Plasma TX-P42G15B Operating Instructions Manual Manual pdf 50 page image

REC PROGRAMMEDVD/VCR TVTEXT STTL INDEX HOLDDIRECT TV RECNOPTION BACK/RETURNVIERATOOLSASPECTAVEXITMENUINPUTGUIDETVabc defjklghi mnotuvpqrs wxyz50Recording ControlsTimer Programming from MenuThe Timer programming menu allows you to choose programmes that you wish to record. At the correcttime, the TV will switch on and tune to the correct channel (even if the TV is in Standby mode).TV Guide may also be used to set timer programming. (p. 20)If the recorder is compatible with Q-Link or similar technologies (p. 66), and setup / connection are done● completely (p. 64 and p. 66), you do not need to programme the recorder – the TV will control the recordingprogress.If the recorder is not compatible with Q-Link or similar technologies, set “Q-Link” in the Setup Menu (p. 32) to● the connected terminal (AV1 or AV2), and make timer programming of the recorder (Read the manual of therecorder).Recording is possible in composite video via SCART only - including HD content.● While recording, you cannot watch any other channels except the one being recorded.●1 Select the mode you want to set a recordingp. 15TV2 Display the menuMENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “Timer Programming”Timer Programming AccessLink Settingsfreesat Tuning MenuChild LockSetup MenuOff Timer OffOther Sat. Tuning MenuDisplay SettingsSystem MenuOther Settingsaccessselect5 SetTo return to TV■ EXITTo stop■recordingGUIDEEXITCautionThe TV must either be On or in standby.● For preparations of a recorder, read the manual of the recorder.● No other channel can be selected during recording.● It may not be possible to record an encrypted programme (which is copy-protected).●