10TroubleshootingStarting upPower does not come on. Make sure the camera cable is connected properly.•Refer to the connections on Page E-7.Unusual sound is heard. Some operating sounds may be evident when powering on, switching•operation modes and zooming. Sounds in such cases do not necessarilyindicate a problem.ShootingCannot start shooting. Make sure the recorder’s operation mode is CAM Mode.•Cannot focus automatically. Make sure the camera is in auto focus mode, where you can focus•automatically.You may be shooting a scene where it is difficult to bring the subject into focus•in the auto focus mode. If this is the case, focus in the manual focus mode.It may be hard to bring the subject into focus whenboth close and distant objects are to be shot·shooting through a dirty window·shooting in a dark place·there are sparkling or shiny objects around the subject·the subject is moving fast·shooting a scene with minimal contrast·Video is distorted or notrecorded.(Refer to the Operating Instructions for the Memory Card Portable-RecorderAG-HMR10.)Are the recorder and the video output device connected properly?•Does the video input terminal coincide with the selected input terminal of the•recorder?Is a proper video signal output from the device connected to the recorder?•SpecificationsSupply voltageDC ** Vwhen the battery is used) /** V (when the AC adapter is used)Power consumption *.* Windicates safety information.Ambient operating temperature0 °C to 40 °C (32 °F to 104 °F)Ambient operating humidity10% to 80% (no condensation)Weightapprox. *.* kgDimensions (W x H x D)53.5 mm × 56 mm × 122.8 mm(excluding the projection part)Image sensor1/4.1-inch MOS type solid-state image sensor (× 3)(progressive-capable)LensLEICA DICOMAR Optical image stabilizer lens,Motorized 12 x zoom,F1.8 to F2.8 (f=4.0 mm to 48 mm)(35 mm equivalent: video 40.8 mm to 490 mm(16:9))Filter diameter43 mmColor separation optical systemPrism systemWeight and dimensions are approximate.Specifications are subject to change without notice.