Panasonic RAMSA WX-RP158 Operating Instructions Manual

Also see for Ramsa WX-RP158: Operating instructions Operating instructions

each channel selection switch set to a differentnumber.. In case that radio interference is encountered,change the frequency immediately.. The distance between groups may be changed byvarious conditions.Note:If the receiving level indicator lights with turning onthe power of the diversity receiver and turning offthe power(remove the battery from wireless micro-phone) of wireless microphone, this diversityreceiver will be interfered by the external radiowave.How to set the frequency1, Turn off the power of receiver.2. set the group selection switch of this wirelessDo not set the wireless microphone to out of trans-mission frequency before batter installation.microphone to the same number as the one of thetuner unit of diversity receiver.. Set the channel selection switch of this wirelessmicrophone to the same number as the one of thetuner unit of diversity receiver.Note: Use the Miniature screw driver to set theabove switches.. Turn on the power of diversity receiver side only.Set the diversity receiver to the desired frequency.Confirm that the receiving indicator on the receiverlights off.Otherwise Battery indicator will not lights up.However, battery will consume even above condi-tion.