Panasonic REV-1 Service Manual

8-6.8-7.8-8.8-9.Setting time for each modeThe time is set on each mode in order to protect tape and capstan driver. When the setting time isover, the mode is gone to the next mode.Mode Setting time Switching modeSTILL, PAUSE Approximately 5 minutes STOPCUE/REV lock Approximately 10 minutes PLAYSLOW Approximately 10 minutes STOPOperation of short CUEShort CUE stops when the Take-up photo sensor detects the black portion of the tape.However its sensor does not detect the black portion within 4.0+ 1.0 sec., the mode except Poweron/off and Eject modes will be abe to be operated after the unit stops. This is same as the timer overoperation of the reel lock.Loading/Unloading Mechanism lock eLoading and unloading times are set, and in case the mechanism locks during loading or unloadingoperation within the defined time, the unit detects the mechanism lock and loading motor reverses orstops.Loading operation lock: Cassette tape is unloaded and ejected within 5 seconds.Unloading operation lock: Power is truned off within 5 seconds.Cassette Ioadinghmloading lock a(1) Mechanism locks during the cassette in operation.Cassette tape is ejected approximately 2 seconds later when the mechanism locks during thecassette in operation.In case mechanism locks during eject operation, cassette tape is inserted and power is turnedoff approximately 2 seconds later.When Mechanism locks during cassette in operation, power is turned off approximately2 seconds. @In case the mechanism lock is released on the way and cassette is ejected, the unit continues thenormal operation.(2) Mechanism locks during the eject operation.~ Cassette tape goes to cassette down position approximately 2 seconds later and power isturned off when mechanism locks during eject operation.Q Mechanism locks during cassette down operation, power is turned off.42

/ 47

Related manuals for Panasonic REV-1