Panasonic RF-U350 Operating Instructions Manual

Contents

RQT894655Different ways to use the unitSelecting the sound qualitythat suits the broadcastEach time this button ispressed, the position of“ ” changes.NORMAL-M U S I C -N E W S -H I G H -This position isrecommended forprograms.Set to this position to enjoymusic.Set to this position to listento news programs.Set to this position whenhigh-pitched sound is hardto hear.Using the sleep timerPress .The unit’s power is automatically turned off when the set time isreached.Each time the button is pressed, the setting changes inthe following sequence: 30 (minutes) 60 90 120OFF (released)To display how much time remains until the set timePress .When the power is turned on again, the broadcast station that was lasttuned in when the power was turned off, will be tuned in.Listening to sound viaearphone (not included)• Turn the volume downbefore connecting theearphone.Plug type:Ø 3.5 mm monaural mini plugAvoid listening for prolonged periods oftime to prevent hearing damage.NoteRemaining timeNotePress or .RF-U350 RF-U300Preset tuningA total of 10 FM stations can be preset.Preset stationsWhile listening to the station you want to register, hold down one ofthe number buttons [1] to [5] for at least 1 second. The number ofthe button you pressed and “PROGRAM” now appear on the displaypanel, and the station is registered in the button concerned.Example: When you registered astation in button [1] 87 . 60 M1• To register a station greater than 5, first press [5+], then, e.g. toregister 7 (within 10 seconds) press and hold [2].Listening to a station which you have registeredAfter the power has been turned on, press the number button in whichthe desired station has been registered. (To listen to, e.g., station 7,press [5+], then press [2].) The station will then be tuned in.Changing a station which you have registeredWith the new station you want to register already tuned in, press and holdthe button with the number whose registered station is to be changed sothat you will overwrite the existing station with the new one.Setting the clockThe 24-hour system is used to displaythe time on the clock.CLOCK 0 : 001. Press and hold.CLOCK 14 : 002. Select the time.3. Press .• To display the clockwhen the unit is on PressThe time is always displayed while thepower is off.The cl oc k i s acc ur at e to within± 60 seconds a month. Readjust ifnecessary.NoteRF-U350 RF-U300The illustrations showRF-U350.