Panasonic RP-SDZA64GAK Owner's Manual

Also see for RP-SDZA128AK: Operating instructions Operating instructions

Contents

specifications

3≥ This card is formatted to the SDXC memory card standard. Ifreformatting is ever necessary, format it using SDXCcompatible equipment or SD formatting software compatiblewith SDXC memory card. Formatting the card with any othersoftware will make the card non-standard and cause problemswith compatibility and performance. For a free version of SDformatting software, visit the following homepage.http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html≥ To use the card on one device after using it on another, performlow-level formatting (overwrite-formatting) on the card beforeusing it on the new device. Performing low-level formattingerases all data. If any data in the card is necessary, save thedata on a PC or other device before performing low-levelformatting.≥ Do not use or store in locations directly exposed to sunlight, aheat vent, or a heating appliance.≥ Do not disassemble or remodel.≥ Do not impact, bend, drop, or wet.≥ Do not touch the metal terminals with your hands or metalobjects.≥ Do not detach the label on the card.≥ Do not attach other labels or stickers.≥ Do not use this card in a location subjected to static electricityor electrical noise. If the host device does not operate normallydue to the effects of static electricity on the card, then removethe card from the host device and insert it again.≥ Do not use or store in humid or dusty locations.≥ Do not use or store in locations exposed to corrosive gases.≥ Switch the write-protect switch a to“LOCK”. Unlock when you want to recordor edit the card again.≥ While data is being read or written, donot remove the card or turn off anyequipment using the card. Do notremove the batteries from battery-operated equipment. These actions cancause data to be destroyed.≥ Make backup copies of your data wherever possible.Panasonic will not accept responsibility for any data loss, orloss directly or indirectly caused by data loss.≥ SDXC compatible equipment may contain the functions“Format” and “Erase”. However, in most cases all data on thecard will not be completely erased even after performing thesefunctions. When disposing or transferring ownership of thecard, we recommend using Panasonic formatting software(http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html)to completely erase all data from the card.≥ When you dispose of the SDXC memory card, destroy itphysically or erase all data completely and follow your localrules of separation and disposal of waste.Interface: New standard SDXC memory cardinterface (New ultra high speed UHS-IIinterface, UHS-I interface andconventional SD interface)Clock frequency: up to 50 MHz (conventional SDInterface)up to 100 MHz (UHS-I Interface,SDR50)up to 208 MHz (UHS-I Interface,SDR104)up to 52 MHz (UHS-II Interface,FD156/HD312)Operating voltage: VDD1 2.7 V to 3.6 VVDD2 1.7 V to 1.95 VDimensions (WtHtD): 24.0 mmk32.0 mmk2.1 mm( a a )Mass (Weight): 2 g (0.07 oz)Operating temperature: –25 oC to i85 oC (j13 to i185 oF)¢1 Video speed class 90, Minimum Transfer Rate above 90 MB/sis sustained in condition of Video speed class.¢2 UHS speed class 3. Minimum Transfer Rate above 30 MB/sis sustained in condition of UHS speed class.¢3 Minimum Transfer Rate above 10 MB/s is sustained incondition of conventional SD speed class.≥ Minimum Transfer Rate is based on our internal testing underthe condition defined by SD Association, and it may varydepending upon host device and file size. The unit of MinimumTransfer Rate [MB/s] indicates 1,000,000 bytes/s.≥ Specifications are subject to change without notice.≥ Mass and dimensions are approximate.≥ SDXC Logo is a trademark of SD-3C, LLC.Handling and storage precautionsProtecting your dataLOCKCautions about disposal or transferringownership of this cardSpecificationsSupported Speed ClassUHS-IIInterfaceUHS-IInterfaceConventional SDInterface¢1 ¢2 ¢3