Panasonic RR-QR400 Operating Instructions Manual

Also see for RRQR100 - IC RECORDER: Operating instructions Service manual

Contents

1093 Set the times.1 Within 10 seconds, press [PLAY/STOP, SEL].The start time flashes.2 Within 10 seconds, turn [PLAY/STOP, SEL]to change the start time.3 Within 10 seconds, press [PLAY/STOP, SEL].The start time is set and the finish time flashes.4 Within 10 seconds, turn [PLAY/STOP, SEL]to change the finish time.5 Within 10 seconds, press [PLAY/STOP, SEL].The display changes in the following order indicating completion ofthe settings.Recording start time # Recording finish time # Current number of files# Normal display3 Set the times.1 Within 10 seconds, press [PLAY/STOP, SEL].The start time flashes.2 Within 10 seconds, turn [PLAY/STOP, SEL]to change the start time.3 Within 10 seconds, press [PLAY/STOP, SEL].The start time is set.The display changes in the following order indicating completionof the settings.Playback start time # Selected file number # Normal displayThe timer playback stops automatically.RECFRECFPLAYFPLAYPMFBPLAYFPMRECFBPMRECFBTimer recording display Timer play displayStart timeStart timeFinish timePreparation:Select the folder to record into. (page 6, step1)2 Within 10 seconds, turn[PLAY/STOP, SEL] to select“On”.1 Press [MODE] several timesuntil the timer recording dis-play is displayed.Preparation:Select the folder and the file you want to play.(page 6, steps1-2)2 Within 10 seconds, turn[PLAY/STOP, SEL] to select“On”.1 Press [MODE] several timesuntil the timer play display isdisplayed.The timer indicators (RECF and PLAYF) light to show which timer is set and flash when the timer is operating.To cancel the timer:Select “OFF” in step 2 and press [PLAY/STOP, SEL].To check the timer settings:Press [MODE] several times until the timer display is displayed. The display will then change to show the following automatically.Timer recording: Start time, finish time, folder the file will enter.Timer playback: Start time, folder and file to be played.Note .≥The two timers cannot be used together. The timer set last is activated.≥The timers can only be set within a single twenty-four hour period. The recording timer can only be set if there is one minute or more of available recording time.≥If you make recordings before timer recording begins, be aware that the time available is reduced. The timer recording can only continue as long as the available time allows.≥If VAS is left on during timer recording, the recording may be shorter than the set time.≥The timer settings are canceled if the clock is cleared (i.e. the batteries are removed from the battery compartment).Timer recording and playback∫Timer recordingRecording can be set to start and finish at set times. You must set the current time(see page 3).∫Timer playbackPlayback can be set to start at set time. You must set the current time (see page 3).Timer playback cannot be selected while an empty folder is selected.

/ 8

Related manuals for Panasonic RRQR100 - IC RECORDER