VQT2Y3919Each time you press • A-B / MENUwhile stopped, the playbackstyle is switched as follows.Repeat play/Successive playALL → ALL → No display →“ALL” displayThe selected file untilthe last file in the selected folder areplayed successively. The unit stopswhen the playback finishes.(The factory setting is “ALL”.)“ALL ” displayPlays all files in thefolder repeatedly.The display changes to “ ”(lighting) and repeat play starts.Canceling A-B Repeat:Press • A-B / MENUor u , i while playing. Orpress STOP.Press • A-B / MENU while playing.1A-B Repeat playPlayback repeats between the start point (A)and finish point (B) if those points are set.* You cannot set A-B Repeat in the following cases;• Within approx. 1 second from the beginning ofthe file and within approx. 2 seconds from theend of the file• Less than approx. 2 seconds between the startpoint (A) and finish point (B)* When only the start point (A) is set and playbackcontinues until the end of the file, the end becomesthe finish point (B) and A-B Repeat begins.* During A-B Repeat playback, the Slight returnplayback (➜ page 18) is not available.The start point (A) is set and“ ” (blinking) and “ ”(lighting) are displayed.Repeat play/Successive play, A-B Repeat playNo displayWhen the playback forone file finishes, the unit stops.“ ” displayPlays one file repeatedly.* Select one of the above settingsand, press q/g to start playback.Press • A-B / MENUat the finish point (B).2STOP• A-B / MENUAdvanced Operations