Panasonic RX-D10 Operating Instructions Manual

Also see for RXD10 - RADIO CASSETTE W/CD: Operating instructions Operating instructions Service manual

Contents

11RQT5210ListeningA1B2345C5 23 1Total play timeTotal number of tracksPlay timeTrack numberProgram orderSpecified track numberTotal play time of programmed tracksListening to CDsProgram playYou can program up to 24 tracks.Preparation:• Set [ ] to “CD”.• Program play cannot be used in combination with random play.When “ ” is displayed, press [CD PLAY MODE] to clearthe display.1 Press [L CLEAR].The total number of tracks and total play time of the CD aredisplayed.2 Press [–/g] or [f/+] to select the desired track.3 Press [MEMORY].“ ” is displayed.4 Repeat steps 2 and 3 until you have programmedall the tracks you want.5 Press [-/ J].Play will start in the programmed sequence.To cancel program play:Press [L CLEAR] in the stop mode to display “CLr”.Pressing [CD c] will cancel program function.When “– –:– –” appears: AThis means that the total play time of the programmed tracks hasexceeded 100 minutes. Tracks can still be programmed and played.When “FULL” appears: BThe number of programmed tracks is limited to 24. No further trackscan be programmed.Memory retention of programmed tracks:The memory retains the program even if play is stopped or the unit isturned off.The display “P” indicates that programming is retained in the memory.CTo check what has been programmed:While “P” display is on, press [–/g] or [f/+].The display will show the track number and programmed sequence.Notes• During program play, you can search forward or backward onlywithin the current track.• During program play, skipping is always in the programmed order,whether forward or backward.